Astrovid 2000 CCD Imaging System FREE SHIPPING - MINT!

[SIZE="Large"][COLOR="Blue"]This item is absolutely MINT in box - never used![/COLOR][/SIZE]
[COLOR="Red"]Retails for $595 (internet)[/COLOR]

[COLOR="Green"]Free UPS Ground shipping in 48 Continental States[/COLOR]

[COLOR="Blue"][SIZE="Large"] This item also listed on eBay at:[/SIZE][/COLOR]
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7529014678&rd=1&sspagename=STRK%3AMESE%3AIT&rd=1

AVA ASTROVID 2000

HI-RESOLUTION ASTRONOMICAL CCD VIDEO IMAGING SYSTEM



[SIZE="Normal"]THE ASTROVID 2000 is SIMPLY THE BEST CHOICE FOR VIDEO ASTRONOMY!



THE SYSTEM[/SIZE]


The ASTROVID 2000 Astronomical CCD Video System, manufactured by Adirondack Video Astronomy is a "High-Resolution Real-Time Video System" optimized for Video Astronomy. We use only SONY A grade CCD's in every camera. Every component used in the system has been selected to provide the best possible video images. The control box, power supply, cable, cable adapters, and telescope adapters are just as important as the camera itself when it comes to producing high quality images. No "off the shelf video camera will perform as well as the Astrovid 2000 for high resolution low light applications.



[SIZE="Normal"]THE CAMERA[/SIZE]



The heart of the system is the ASTROVID 2000 which uses a SONY HAD ICX038DLA interline transfer chip with 8.4 (horiz) by 9.4 (vert) micron pixels for high resolution images.



The composite video output allows the observer to connect to a Camcorder, VCR, TV, or High Resolution monitor. A High Resolution monitor is recommended as the system is capable of producing 600 lines of horizontal resolution.



The Astrovid 2000 has a spectral sensitivity range of 400 to 1100 nm. This allows a full range of imaging and even permits the use of filters to isolate and view various features found in Solar System objects. For commercial applications the Astrovid 2000 can image in the near infrared. With proper filtration the camera can be used as a Visible light or IR camera.



[SIZE="Normal"]THE CONTROL BOX[/SIZE]



To further enhance the ASTROVID 2000 Astronomical CCD Video System a separate control box was developed to move all the required controls off the camera. User determined controls include, shutter speed, gain, and contrast (gamma). These controls are required due to the vast differences in brightness and contrast of astronomical objects.



The use of the control box allows for easy manual adjustment of the shutter speed, gain, and gamma. Without manual control of shutter speeds, gain, and gamma a camera is not suited for the application of Video Astronomy.





[SIZE="Normal"]PERFORMANCE [/SIZE]



When it comes to performance for Video Astronomy none of the inexpensive auto-gain, auto shutter cameras on the market today can come close to the performance of the ASTROVID 2000. In fact, for planetary imaging you will have to stop down your telescope with off axis aperture masks if you use an auto gain/shutter camera. This will allow you to view some planetary detail but you will be missing a great deal of what could have been seen with an ASTROVID 2000! With an Astrovid 2000 you can really explore the terminator of the moon. By adjusting the gain, gamma and shutter speeds you can go deeper into the shadows and bring out hidden detail. This is not possible with the auto gain/shutter cameras. You can also view Jupiter’s eclipsing moons and time occultations with an Astrovid 2000.



Again, the use of our unique control box really enhances the performance of the Astrovid 2000. A separate control box prevents shaking of the telescope when adjustments are made and allows the imager to create smooth flowing videos and presentations. There is no fumbling in the dark for tiny screwdrivers to flip TINY switches or turn MINUTE dials. You can make your adjustments in a matter of seconds all the while watching the effect as you relax in front of your television or monitor!



[SIZE="Normal"]EXTENSION CABLES, SIGNAL BOOSTERS, WIRELESS TRANSMISSION[/SIZE]



Custom extension cords have also been manufactured by Adirondack Video Astronomy to increase the distance from the ASTROVID camera head to the control box up to 50 feet. This SINGLE extension cable contains all the information required for the adjustment of your image at the control box. The cables are modular in design and can be plugged into one another. You can always add more extension cables as your needs grow. These uniquely designed cables allow remote imaging from another part of the observatory or from the comfort of a warm home. They are especially useful in cold climates. The Video cable from the control box can run for a total of 75 more feet. In-line video signal boosters can be used to run the video signal longer distances. These are placed just before the final viewing or recording site. For wireless transmission of the video signal video transmitters of high quality can also be used to send the signal long distances. A cautionary comment when it comes to wireless transmission: In areas where there is a-lot of RF interference the transmitter will be competing for "air-space". This could lead to a loss in bandwidth and a degradation of the signal. The video cable that we supply is 95% shielded and will provide you with excellent images at the monitor. It will also enable you to make excellent recordings of your observations.



[SIZE="Normal"]ASTROVID TO TELESCOPE CONNECTION[/SIZE]





To connect the ASTROVID to your SCT Telescope you would use a T-C adapter. The 1.25"-C adapter is included to attach the camera to any telescope. The C thread end attaches to the ASTROVID 2000 and the 1.25" fits into any 1.25" focuser. You can also use this adapter with single Barlows or Stacked Barlows to obtain close-up views of the Moon and Planets!


[SIZE="Normal"]ASTROVID 2000 IMAGING SYSTEM CAMERA SPECIFICATIONS:[/SIZE]



Image Device: 1/2 " Interline Frame Transfer Device (Sony HAD ICX038DLA)

Image Area: 7.95mm x 6.45mm

Picture Elements: 811 (H) x 508 (V)

Horizontal Frequency: 15.734 KHz (EIA) or 15.625 (CCIR)

Vertical Frequency: 60 Hz (EIA) or 50 Hz (CCIR)

Scanning System: EIA interlace, 525 lines, 60 fields/sec, or CCIR interlace. 625 lines, 50 fields/sec.

Minimum Illumination: 0.01 LUX

S/N Ratio: Better than 48 dB

Resolution: 600 TV lines horizontal

Video Output: Composite 1.0 Vp-p at 75 ohm

Electronic Shutter: 1/60, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, and 2 off positions (all manually selectable)

Supply Voltage: 12 V DC + or -10 %

Power Consumption: 2.4 W

Lens Mount: Standard "C" & "CS"

Connectors: BNC (video), DC power jack (power supply), 4- pole plug (auto iris)

Dimensions: 42 (W) x 48 (H) x 95 (D) mm (excluding connectors)

Weight: 300g without lens

Operating Temperature: -20° C to 55° C

Operational Humidity: Within 85% Relative Humidity

Geometric Linearity: NO Camera Distortion (Picture Linearity Limited by Telescope and Monitor)

Gamma Correction: (Contrast) All Manually Selectable, 0.25, 0.45, 1

Gain Control: Manual Gain Control


[SIZE="Normal"]
ASTROVID 2000 Control Box Specifications[/SIZE]





Box Dimensions: Length: 3 7/8" long x 3" Wide x 1 1/2" High

Box Weight: 5 ounces

Connectors: DC power supply female plug (Power Supply In), BNC 1 Male (Video Out)

Power Cord to Camera: 5 foot cable to camera head. 9 pin male plug (Power, Video, Shutter Speed) 4 pin Auto Iris Plug (Gain)

Shutter Speed: 10 stop selectable switch

Gain: Off to Fully On via Variable Rheostat

Gamma: (CONTRAST) via 2 switches for 0.25, 0.45 and 1.0





[SIZE="Normal"]ASTROVID 2000 B& W VIDEO SYSTEM[/SIZE]



ITEM# AV2000: Kit includes Astrovid 2000 Camera, Astrovid 2000 Control Box with 5' to connect to Camera, 25' Video Cable, Connectors, Power Supply, 1.25" to C Adapter (fits 1.25 eyepiece tubes, threaded for 1.25" filters), Instructions and Warranty.



[COLOR="Red"]Links to pictures taken with Astrovid 2000 (these are not my sites):[/COLOR]



http://www.lafterhall.com/theplanets.html

http://www.starlightxpress-usa.net/adirondack_video_astronomy_galle.htm

http://www.astroimaging.com/main.htm