Easy does it!
Please Log In to view the details for this classified ad.
Don't have an Astromart account? Click here to create one
Although the Half Hitch is the most sophisticated lightweight grab ‘n go mount available, it is also among the easiest to use. Do the obvious: Turn the mount by hand at will — or track or pan immediately with the motion control knobs. There are no clutches to adjust or locks to engage. And there’s no confusing backlash, “stiction,” spring-back, or free-play — just solid, intuitive connection between you and the sky.
Incomplete balance creates havoc and confusion with other alt-az mounts — shifting with every altitude setting. The Half Hitch’s thorough two-axis balancing and fast balance trimmer convert balance issues into non-issues. Stay on target without locks, heavy friction, or sliding the scope back and forth. Just aim and look. Easy.
Changing eyepieces? Set the disc brake. Switch eyepieces. Adjust the balance trimmer with a slight twist of your hand. Release the brake. Go back to observing with your scope still on target. Easy.
Are you looking for a faint fuzzy? Using the fully integrated Sky Commander DSC, the accurate encoder installation and precision geometry of the Half Hitch quickly center the target. Easy.
Setting up your scope? Attach the Half Hitch to the tripod with a single hand-knob — then attach the scope by sliding the dovetail plate into the saddle. Easy.
Trying to get a high-power view? Steady support and precise motion control make focusing and tracking easy.
A telescope can be no better than the mount. Mass-market alt-az mounts are built like kids’ toys. The Half Hitch is built like equipment for the space program. Reliable and solid. Beginner friendly. Appreciated by experts.
• Rigid cross-braced design weighs only 5.3 pounds but solidly carries a 115 mm APO
• All CNC machined from aircraft alloys for precision and strength
• Ultra-smooth, ultra-responsive motion controls: Pan fast or track slow — one knob
• No counterweights, clutches, or locks to engage
• Two-axis balancing eliminates annoying balance changes as you rotate your scope
• Balance trimmer easily nulls differences in eyepiece weights
• Engraved scales for presetting balance positions
• Caliper disc brake for the altitude axis makes changing eyepieces simple
• Tripod-friendly centerline load position — stable and fast damping
• Superior, easy-engaging, vise-like dovetail system (included in base price)
• Preloaded Timken bearings for shake-free support
• Heavy-duty, precision ground, stainless steel shafts
• Handsome, durable anodized finished highlights the exquisite machining
• Integrated 4096-count encoders set in very accurate bores
• Folding DSC bracket for compact travel; No cable wrap
• Excellent tripod clearance; No column extension needed
• Built only in limited quantities for personal attention to detail
Enhance your investment in your premium optics. Don't be disappointed because you skimped on one critical component. Try the Half Hitch and discover the telescope mount you’ve always wished you had.
Take advantage of special package pricing before it ends on December 18. There’s only one more batch of Half Hitches available in 2008. The next batch of Half Hitches will not be released until early March of 2009.
Incomplete balance creates havoc and confusion with other alt-az mounts — shifting with every altitude setting. The Half Hitch’s thorough two-axis balancing and fast balance trimmer convert balance issues into non-issues. Stay on target without locks, heavy friction, or sliding the scope back and forth. Just aim and look. Easy.
Changing eyepieces? Set the disc brake. Switch eyepieces. Adjust the balance trimmer with a slight twist of your hand. Release the brake. Go back to observing with your scope still on target. Easy.
Are you looking for a faint fuzzy? Using the fully integrated Sky Commander DSC, the accurate encoder installation and precision geometry of the Half Hitch quickly center the target. Easy.
Setting up your scope? Attach the Half Hitch to the tripod with a single hand-knob — then attach the scope by sliding the dovetail plate into the saddle. Easy.
Trying to get a high-power view? Steady support and precise motion control make focusing and tracking easy.
A telescope can be no better than the mount. Mass-market alt-az mounts are built like kids’ toys. The Half Hitch is built like equipment for the space program. Reliable and solid. Beginner friendly. Appreciated by experts.
• Rigid cross-braced design weighs only 5.3 pounds but solidly carries a 115 mm APO
• All CNC machined from aircraft alloys for precision and strength
• Ultra-smooth, ultra-responsive motion controls: Pan fast or track slow — one knob
• No counterweights, clutches, or locks to engage
• Two-axis balancing eliminates annoying balance changes as you rotate your scope
• Balance trimmer easily nulls differences in eyepiece weights
• Engraved scales for presetting balance positions
• Caliper disc brake for the altitude axis makes changing eyepieces simple
• Tripod-friendly centerline load position — stable and fast damping
• Superior, easy-engaging, vise-like dovetail system (included in base price)
• Preloaded Timken bearings for shake-free support
• Heavy-duty, precision ground, stainless steel shafts
• Handsome, durable anodized finished highlights the exquisite machining
• Integrated 4096-count encoders set in very accurate bores
• Folding DSC bracket for compact travel; No cable wrap
• Excellent tripod clearance; No column extension needed
• Built only in limited quantities for personal attention to detail
Enhance your investment in your premium optics. Don't be disappointed because you skimped on one critical component. Try the Half Hitch and discover the telescope mount you’ve always wished you had.
Take advantage of special package pricing before it ends on December 18. There’s only one more batch of Half Hitches available in 2008. The next batch of Half Hitches will not be released until early March of 2009.
Funding Member