Ed Zarenski wrote: "My own experience with binoculars in more than one side by side, all 80mm and less, is that a higher quality binocular at higher magnification but a smaller or equal aperture, will outperform the larger aperture that has a lower magnification".
Ed - This has been my experience as well. About 10 years ago I bought a pair of 10 x 70 Fujinons because they were highly recommended in The Backyard Astronomer's Guide. They were very sharp and clear and overall an excellent binocular. However, a few months later I got a chance to try a pair of 12 x 50 Aus Jena Nobilems and was amazed to find that on 19 out of 20 objects that I compared them on, the 12 x 50s gave me better views than the 10 x 70s.
Obviously, magnification plays a role in this. But, what about exit pupil size? The Adler Index for a pair of 12 x 50s is 85 and it is 84 for the 10 x 70s. But I found the difference between those two to be much more significant. If I was told the 12 x 50s had a Adler Index of 85 and was then asked to guess what it was for the 10 x 70s were I would have estimated around a 75.
But the other factor that plays a role in this is exit pupil size. The 10 x 70s exit pupil is 7.00mm, the 12 x 50s is 4.17mm. And my own personal entrance pupil at that time was around 5.00 - 5.50mm. Now it has further shrunk to about 4.25 - 4.50mm (I use Sky & Telescope's Pupil Guide to estimate this). Anyway, for purpose of making the example clearer, let's say that my entrance pupil was 5.00. That means when I'm using the 10 x 70s (with their 7.00mm exit pupil) half of the light that is being collected by the binocular objectives is not reaching my eye. So my smaller entrance pupil is functioning like an aperture stop on a telescope. And, when you cut the amount of delivered light by half, those 10 x 70s should be performing (for someone like me) like a pair of 10 x 50s. And, if that is the case, then it is clear why the 12 x 50s are delivering 100% of the light that they are collecting (and at a higher magnification) should be outperforming the 10 x 70s.
Anyway, what I just wrote was "conventional wisdom" 10 years ago. Do you know of any reason why that type of user entrance pupil/binocular exit pupil type of analysis should not be taken into consideration when trying to numerically estimate how well one binocular should perform in comparison to another when used by a particular observer?
Ed - This has been my experience as well. About 10 years ago I bought a pair of 10 x 70 Fujinons because they were highly recommended in The Backyard Astronomer's Guide. They were very sharp and clear and overall an excellent binocular. However, a few months later I got a chance to try a pair of 12 x 50 Aus Jena Nobilems and was amazed to find that on 19 out of 20 objects that I compared them on, the 12 x 50s gave me better views than the 10 x 70s.
Obviously, magnification plays a role in this. But, what about exit pupil size? The Adler Index for a pair of 12 x 50s is 85 and it is 84 for the 10 x 70s. But I found the difference between those two to be much more significant. If I was told the 12 x 50s had a Adler Index of 85 and was then asked to guess what it was for the 10 x 70s were I would have estimated around a 75.
But the other factor that plays a role in this is exit pupil size. The 10 x 70s exit pupil is 7.00mm, the 12 x 50s is 4.17mm. And my own personal entrance pupil at that time was around 5.00 - 5.50mm. Now it has further shrunk to about 4.25 - 4.50mm (I use Sky & Telescope's Pupil Guide to estimate this). Anyway, for purpose of making the example clearer, let's say that my entrance pupil was 5.00. That means when I'm using the 10 x 70s (with their 7.00mm exit pupil) half of the light that is being collected by the binocular objectives is not reaching my eye. So my smaller entrance pupil is functioning like an aperture stop on a telescope. And, when you cut the amount of delivered light by half, those 10 x 70s should be performing (for someone like me) like a pair of 10 x 50s. And, if that is the case, then it is clear why the 12 x 50s are delivering 100% of the light that they are collecting (and at a higher magnification) should be outperforming the 10 x 70s.
Anyway, what I just wrote was "conventional wisdom" 10 years ago. Do you know of any reason why that type of user entrance pupil/binocular exit pupil type of analysis should not be taken into consideration when trying to numerically estimate how well one binocular should perform in comparison to another when used by a particular observer?