Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

ideas for DIY binoscopes

Started by light trap, 07/29/2003 10:17PM
Posted 07/29/2003 10:17PM Opening Post
Most of us fantasize about owning one of the really big astro binoculars, but for most of us, they will remain an unrealized dream, rather than a reality. Every once in awhile, I think about making something in the 100-150mm class. A few years ago I wondered about the feasibility of making a binoscope out of paired Astro Rubinar 100mm Maks. The fact that those converted camera lenses are helical, barrel twist focus pretty much rendered the idea worthless before I even finished fully thinking it through.
Now that ETXes are so far down in price, I wonder if paired ETXes wouldn't be a much better idea. I'd guesstimate that one could come up with some pretty darn good 40x90s for under $500 total using the ETX as an OTA platform.

Another one that really intrigues me is the idea of pairing a couple of newts. I know there are several folks out there who've successfully done just that, and JMI is now even offering a reverse view commercial version. However, my idea is perhaps even more grandiose, (and perhaps whackier).

What I envision is a lazy-susan style bino-chair, with the newt OTAs suspended above the observer on an oversize yoke mount. To view through them, you could use a pair of periscope mirror assemblies. The whole idea would be that the observer could control where the chair, and thus the optics pointed by means of a simple joystick controller. If the tubes were mounted on a simple alt-az mount, and if the chair reclined, then horizon to zenith shouldn't be a problem.

Some thoughts on OTAs would include the Orion 6" Pro EQ, which is now available as just the OTA for $179/ea. Or, for a true planetary binoscope, the Intes MN56 should prove to be a simply amazing binoscope platform, particularly since they're appearing on Astromart in the $350-$600 range. The problem with those ideas, is that I don't know to what extent the periscope mirrors would interfere with the viewing enjoyment.

So, anyway, what are your ideas for a cool, affordable binoscope? Let me know if anybody actually gets around to building any of this stuff. ;-)

Mike Swaim
Posted 07/29/2003 11:25PM #1
I haven't built any (see the other thread). I did get a Meade SN6 ($200) to try "over the shoulder" bazooka-style. A star diagonal redirects the light along the tube axis, but I was thinking looking UP rather than down. If this works, a twin-tube alt-az mount (Giro??) -- or a yoke as you suggest -- can be positioned behind the recliner etc. Or it could be a mobile unit :-)

-- William Chang (Saratoga CA)
Posted 07/31/2003 03:50PM #2
Ya know, everytime I start adding up what it'd cost to fabricate one's own binoscope, two thoughts occur to me. One, is what a comparitive bargain such things as the premium astro version Oberwerk 25/40x100s and similar binocs are. Two, that it really might make the most sense for me, personally, to think in terms of a binoviewer as an alternative to binoculars over 100mm. Let's face it, $2K would buy a pretty good DOB and Denkmeier binoviewer.

Mike Swaim