Image of the day

Captured by
Arthur Hogan

Wizard Nebula

My Account

New to Astromart?

Register an account...

Need Help?

Aberration on star test?

Started by fblue, 06/29/2004 12:12AM
Posted 06/29/2004 12:12AM | Edited 06/29/2004 12:14AM Opening Post
I have a friend with a new DOB. He is getting a weird aberration on the star test that we are trying to trace down.
It disappears by placing you hand over the edge of the secondary cage opening by about 1". This happens around the same area as above the focuser. At first that is what I thought it was, focuser intrusion and the brightly polished rails of the FeatherTouch focuser. But the he found that with an EP that did not place the focuser into the secondary, it was still there.
The aberration switches from about 7:30 position to about 180° of 2:30 position with a change from in focus to out focus diffraction rings.
I am running out of ideas at this time. He believes it might be pinched optics, perhaps the secondary, but I did not think this would be the result of that.
Here is a picture where I try to show what it looks like, a set of horns on the outer ring.
Any ideas would be greatly appreciated.
I will get two diag mirrors back in a couple of weeks and we can try one of those then, but I would like to try to find the problem before then.
Floyd

Attached Image:

fblue's attachment for post 17037

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 06/29/2004 12:23AM #1
Could you be getting a small specular reflection off of some shiny part near or around the spider or focuser? Does it move around at all when you move the telescope?

Russ Schnitzer
Posted 06/29/2004 04:34AM #2
I've seen this pattern in severely pinched lenses.
Maybe see if one of the primary mirror clips is way too
tight. Also check for a chip or ding around the
edge of the primary.

Another idea is the diagonal mirror holder. Some
of these have a shell made of formed thin aluminum
sheet that holds the diagonal, and also covers a
couple mm around the edge of the diagonal mirror.
Usually there is a small gap in the shell on the side
facing the focusser, where the edge of the diagonal
is uncovered. If this scope is designed
with a diagonal that is too small, you would get
extra diagonal mirror at the gap, and an extra
spike of light there. You could try covering the
gap with a small piece of tape and see if the spike
goes away.