air condition the primary

Started by ddrake, 04/15/2004 03:23PM
Posted 04/15/2004 03:23PM Opening Post
What do you all think of this idea? As described in the May S&T, the thermal boundary layer is one of the most destructive factors in the optical chain in a newtonian. It is a warm pocket of air just abouve the primary that just doesn't go away on nights with rapidly falling temps. To prevent this I'm going to try to put a jug of frozen water between the mirror and a house fan which could possibly cool the mirror to slightly BELOW the air temp and eliminate the boundary layer at least temporarily. Any one else ever tried this?
Posted 04/15/2004 03:39PM #1
Could also cause DEW to form on the mirror.
Floyd

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 04/15/2004 03:39PM #2
And I'd like to throw a question into the mix: Does it make any difference if the mirror is warmer than ambient or cooler in the thermal effects present?

Mark
Posted 04/16/2004 04:29PM #3
Darren, et al,

Ive been giving this some thought ever since buying an Obsession 15 a few years ago. The muffin fan helps, but Im thinking about placing those cool packs that are in first aid kits, or similar cooling packs to at least beging the cooling process. My wife is a nurse and brought home a several large cool packs that you squeeze and then shake to activate the cooling process. That combined with the fan may hasten the mirror's cooling a bit. I have actually tried it yet, but in theory it sounds goodsmile

Mark

15" Obsession


Mark
Obsession 15/Swayze #643
Celestron Ultima 8 PEC and Nexstar 5i
Orion Starblast
24" 2.8ghz Intel iMac and 13" MacBook
Nikon D40 DSLR