I recently replaced my JMI DX3 for a FeatherTouch focuser.
I had heard others say that they noticed the laser collimator dot would move slightly from the center mark when you racked the focuser completely in and out.
I never saw this with the JMI but now I do notice a little change in position with the FeatherTouch. The amount is quite small, but it is there none the less. I used levels to make sure the focuser board was level and the focuser was leveled to the board. I also checked with great precision that the focuser was perpendicular and level to the diagonal mirror. The mirror is properly centered in the secondary cage and I have checked the position thoroughly.
Some one mentioned that this was the geometry of the focuser that caused this to happen. Does anyone know for sure why this would happen with one focuser and not the other.
It is not a problem really as the movement is quite small, it is that I am curious more than anything else.
Floyd
I had heard others say that they noticed the laser collimator dot would move slightly from the center mark when you racked the focuser completely in and out.
I never saw this with the JMI but now I do notice a little change in position with the FeatherTouch. The amount is quite small, but it is there none the less. I used levels to make sure the focuser board was level and the focuser was leveled to the board. I also checked with great precision that the focuser was perpendicular and level to the diagonal mirror. The mirror is properly centered in the secondary cage and I have checked the position thoroughly.
Some one mentioned that this was the geometry of the focuser that caused this to happen. Does anyone know for sure why this would happen with one focuser and not the other.
It is not a problem really as the movement is quite small, it is that I am curious more than anything else.
Floyd
[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue
Amateur Imager