Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

BC&F: Micro Star-Drive

Started by thari, 11/11/2004 03:59PM
Posted 11/11/2004 03:59PM Opening Post
Has anyone out there any experience with this product from DigitalAstronomy.com? I would really like to see an operations manual for it, but the DA.com people don't seem to respond to email. Any help? Thanks.

Attached Image:

thari's attachment for post 20111
Posted 11/12/2004 04:31PM | Edited 11/12/2004 04:32PM #1
John,
I haven't used this product, but it looks very much like an adapted Chinese eq mount (cross between an EQ1 and EQ2). Personally, I question the usefulness of these types of camera trackers. Basically, it's an eq head from a regular german equatorial mount placed upon a very low platform. Why not just buy a GEM (particularly one with a built-in polar alignment scope in the RA bore, which the Micro Star-Drive doesn't have) and place a camera where the telescope would be. The height will be more convenient (you won't have to have a table to place the mount on) and you can use it for a small telescope too (would be inconvenient with a table-mount). In fact, you can use the scope to guide the mount's motions and thus you can use longer focal length camera lenses to actually capture detail in some deep sky objects; you may get bored with just taking unguided, wide-angle Milky Way shots.

This is just my take on these camera trackers, however the fact that these have been sold for a number of years, but have never really broken into the market, suggests to me that there are better alternatives available.

No disrespect intended towards DigitalAstronomy.com, but I just don't see any advantage to using a Micro Star-Drive over a traditional GEM (except that you don't have to carry a tripod I guess), and do see some significant disadvantages (difficult to accurately polar align, need for a flat, stable platform, likely need to disengage motor drive to use slo-mo controls).

Best of luck in any case!
Tim