This should generate some lively discussion. I currently own a C14 on an MI250 goto mount. It is a nice set up that I have only had for 8-9 months. It was to be the start of a solid CCD imaging system. As many of you who have been in this group for the last 10 years or so know, I have owned many scopes... a 20" dob, 12" LX200, and a host of other smaller SCT's and rich-field refractors. I have just gotten interested in CCD work the last few years and been dabbling in it for about two.
Here is the dillema. I have been searching for a solid compromise scope... solid for both visual and CCD work. The C14's long focal length is a bit prohibitive for Michigan's normally poor seeing much of the year though. I have piggybacked most of my images on the beast. I can easily get a shorter f.l. scope for the mount also and swap out OTA's.
More to the story... I have always loved CZ's mirrors and there is a Starmaster 14.5" goto fully loaded not too far from me that many of you have probably seen available on A-mart. I keep vacillating on what to do. Keep the superior imaging system or get the ultimate visual observing machine.
Over the years, I find myself more drawn to planetary observing and imaging so the Starmaster would do that but hopes of taking those awesome CCD images that others post here would be delayed for a few years. I have even considered a Tom Osypowski platform for imaging with the Starmaster but again, more $$$.
Another aside... I also have a wonderful 10" f/5 Newtonian project near completion with a beautiful Alan Raycraft primary. I am sure it will throw up wonderful planetary images. I could also use that on my MI250 for planetary imaging... and obseve with it in dob mode.
Difficult decisions...
Thanks for your opinions/ input. Not that they will help much... but perhaps they will get me on one side of the fence or the other.
Looking at my toys and their costs... I should be thankful for all that I do have and a spouse that supports it all.
Here is the dillema. I have been searching for a solid compromise scope... solid for both visual and CCD work. The C14's long focal length is a bit prohibitive for Michigan's normally poor seeing much of the year though. I have piggybacked most of my images on the beast. I can easily get a shorter f.l. scope for the mount also and swap out OTA's.
More to the story... I have always loved CZ's mirrors and there is a Starmaster 14.5" goto fully loaded not too far from me that many of you have probably seen available on A-mart. I keep vacillating on what to do. Keep the superior imaging system or get the ultimate visual observing machine.
Over the years, I find myself more drawn to planetary observing and imaging so the Starmaster would do that but hopes of taking those awesome CCD images that others post here would be delayed for a few years. I have even considered a Tom Osypowski platform for imaging with the Starmaster but again, more $$$.
Another aside... I also have a wonderful 10" f/5 Newtonian project near completion with a beautiful Alan Raycraft primary. I am sure it will throw up wonderful planetary images. I could also use that on my MI250 for planetary imaging... and obseve with it in dob mode.
Difficult decisions...
Thanks for your opinions/ input. Not that they will help much... but perhaps they will get me on one side of the fence or the other.
Looking at my toys and their costs... I should be thankful for all that I do have and a spouse that supports it all.