Image of the day

Captured by
Michael Scherman

M17 Swan-Omega Celestron C6 Hyperstar2

My Account

New to Astromart?

Register an account...

Need Help?

Crosshair reticle source?

Started by tomdisco, 02/01/2004 03:05AM
Posted 02/01/2004 03:05AM Opening Post
Aside from the AM member who apparently got deleted for being a non-sponsoring business, is there another source for crosshair reticles built like filters that can be screwed into the bottom of eyepieces?

This seems like a very practical way to modify any 1.25" EP for star alignment rather than buying one particular crosshair EP for that purpose.
Posted 02/01/2004 03:17AM #1
I found that not all EPs will focus on a x-hair that is at that position, some require the x-hair to be near the 1st lens.
I have built my own without a problem. If you have a 1.25" filter cell, you can easily make your own with human hair for the cross hair.
I have made 2 so far for a 32mm Celestron Plossl and a 18mm Keller for my finder scope.
These were made with a fiber washer and 2 human hairs and a little super glue.
I used Photoshop to made the cross on a cirle the diameter of the washer. Printed it on paper and placed the washer in the circle. Used scotch tape to hold the hairs (stretched hairs) in place aligned with the cross and glued them to the washer.
I uncrewed the barrel from the EP. place the washer in the EP and screwed the barrel back in to hold the waher in place. Works great, cost $.05 and was fun to build.
They used human hair in WWII for the sights for bomb sights.
Floyd

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager