Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

Eliminating Mirror Clips

Started by Ron777, 08/04/2004 11:40PM
Posted 08/04/2004 11:40PM Opening Post
While I'm on this, "getting things as good as I can" adventure, I've been wondering what I can do about the mirror clips. Any good ideas on getting rid of them and still having the primary SAFE in it's cell?

I was thinking of just removing the hangover tab deal and using that really strong silicone stuff, (RVT or R..something) and using it to glue the side of the mirror to those side posts that the tabs are on. Just not sure if it would be safe on a car trip with that. Anyone done anything like this?

Ron
Posted 08/04/2004 11:59PM #1
Yuo can trim or space the tabs until they barely come over the edge. Not sure how yours are mounted.
Here is a picture that shows lne of my clips that has been trimed so it barely comes over the edge.
Floyd

Attached Image:

fblue's attachment for post 81927

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 08/05/2004 12:24AM #2
Been there, done that, and I've had no problems. I believe it is the accepted way of mounting your mirror to the mirror cell. You can cut the clip at the 90 degree bend using a hack saw. Then I placed three dabs (about 1 inch square)of silicon (GE brand from Home Depot)on the cell and lowered the mirror onto the silicon. Be sure to place three or four stacks of pennies (3 or 4 to a stack) around the edge as spacers. When the silicon dries, remove the pennies. Then place a dab of silicon between the side of the mirror and the vertical part of the clip. I've never had a problem with the mirror while driving over surface streets. Can't say what would happen in a rough off-road situation.