in attempting to clean my sct, i used isopropyl alcohol and all that other good stuff. However, as i applied strokes to the corrector, larger and much more visible oily marks began to appear. Now my corrector is smudged so much, it's pretty much like a mirror on some parts of the corrector. Is there something i'm doing wrong?
i messed up badly...
Started by acgtek, 12/30/2003 04:50PM
Posted 12/30/2003 04:50PM
Opening Post
Posted 12/30/2003 06:18PM
#2
Make sure you get as close to 100% alcohol as possible, like 94% or if possible 99% Grain alcohol, not rubbing alcohol.
Yes a drop of Dawn detergent in distilled water will help too.
Use a new cotton ball (large ones) each time you swab. Throw away each ball after it is swabbed only once, very important!
Floyd
Yes a drop of Dawn detergent in distilled water will help too.
Use a new cotton ball (large ones) each time you swab. Throw away each ball after it is swabbed only once, very important!
Floyd
[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue
Amateur Imager
Funding Member