Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

New fan module for solid tube

Started by fblue, 08/05/2005 08:49PM
Posted 08/05/2005 08:49PM Opening Post
I just made my first fan module for a solid tube (C10) with speed control. What do you think?

Attached Image:

fblue's attachment for post 25922

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 08/05/2005 08:50PM #1
Here is the rear view with wiring and feet for mounting.

Attached Image:

fblue's attachment for post 94656

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 08/06/2005 12:59AM #2
I did something similar for a Discovery 8" f/8. I simply used a 12" square piece of cheap floor tile (<$2) and placed the fan on the outside. I use the elastics to hook around the outside screws that hold the mirror mount in the tube.

I run the wires to a small switch box with a rheostat for speed control. The power also plugs into the switch box which mounts to the upper portion of one of the dob base uprights with velcro.

Gary Weber

Attached Image:

Lucifigus's attachment for post 94673
Posted 08/06/2005 01:01AM | Edited 08/06/2005 01:03AM #3
Here is a shot of the inside of the fan mounting board. I lined it with flocked paper and used a strip of sorbothane along the perimeter as a gasket for vibration reduction.

I have the fan drawing air down the tube and exhausting out the bottom.

This system has worked very well and is cheap and easy.

Gary Weber

Attached Image:

Lucifigus's attachment for post 94674