Image of the day

Captured by
Bruce Karbal

VDB 142 Elephant Trunk HOO

My Account

New to Astromart?

Register an account...

Need Help?

Wild Card 003

Started by fblue, 06/28/2004 06:52PM
Posted 06/28/2004 06:52PM Opening Post
This is a copy of a message sent to Rick about his latest article. I wanted all to share in it. smile
Rick,
Good article!
You bring up many good points and the comparisons are quite right.
The formula is enough to give me a headache, but that is OK. wink
The basic idea that a scope is a combination of its components is right on the money. Too much emphasis is placed on the primary alone I feel and to little is attributed to the other factors. For the most part, I have seen far too many people that feel "Good Enough" is fine. This is selling the scope short in my opinion. Too little effort is put into collimation and alignment of the optical train for instance. Misalingment and poor collimation degrades the image more than the quality of the mirror in some cases. The choice of components and even the elimination of scattered light with various techniques, flocking, and painting of surfaces and proper baffles or baffle like structures are overlooked. Every little improvement adds to the quality and many small improvements add up to one large improvement. The fine-tuning of a scope can be as productive as any money spent.
I would like to see an article written on this. Something that brings an understanding of how a great scope is actually made. I know that the best manufacturers are already aware of this, but I think that many ATM people are not.
Thanks again for taking the time to explain these complex issues.
Floyd

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 06/28/2004 08:45PM #1
Yeah, but he never tells you what color the scope should be.
Posted 06/28/2004 09:42PM #2
right on floyd, the first thing i do with any of my eguipment is take it apart set up all the mechanical structures to very close tolerance, in cluding things like making shims to adjust gear housing relationships, and removing any light leakage and of course optimizeing the light cone. john