Well, with the new Grab and Go setup, I needed a Grab and Go EP case that would hold the right EPs for the 80mm APO for an evening of viewing.
I decided to use another of the small Rubbermaid 5 quart cooler that cost $8 at Wal-Mart. These are great for carrying things, well made, double wall and even insulated to keep the EPs from dewing up so quickly.
Thought I would post a picture of a finished one for those who might need something similar.
The plate is made of 3/16 press board and painted to make it look better.
In the case are 22mm & 12mm Naglers, 8mm,5mm,4mm,3.2mm B@/TMB Planetary EPs. This give a good range of power and FOV for the 80mm APO.
I decided to use another of the small Rubbermaid 5 quart cooler that cost $8 at Wal-Mart. These are great for carrying things, well made, double wall and even insulated to keep the EPs from dewing up so quickly.
Thought I would post a picture of a finished one for those who might need something similar.
The plate is made of 3/16 press board and painted to make it look better.
In the case are 22mm & 12mm Naglers, 8mm,5mm,4mm,3.2mm B@/TMB Planetary EPs. This give a good range of power and FOV for the 80mm APO.
Attached Image:
[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue
Amateur Imager