I recently purchased a Pentax 30 XW at a discounted price from a dealer who had used the piece as a demo model. Optically and mechanically, it appears to be perfect with one minor exception. I also have a Baader 2 inch coma corrector, and the adapter ring that attaches to the Pentax eyepiece does not fully seat itself. After some careful measurements, I determined that it was engaging the threads only about 5/8's of one full rotation. It seems secure at that point, but that's not enough to make me secure about having the coma corrector suspended over my 16 inch dobsonian mirror.
I tried the adapter ring on a different 2 inch eyepiece, and it threaded on quite nicely, probably three full rotations. That leads me to think that there is something wrong with the Pentax threading. Visually, however, I can see nothing wrong.
Anyone out there ever hear of such a problem? If not, does anyone know whether any competent machinist can check the eyepiece threads and potentially fix the problem, or whether I will have to take this to a specialist?
Thanks -- Darrell
I tried the adapter ring on a different 2 inch eyepiece, and it threaded on quite nicely, probably three full rotations. That leads me to think that there is something wrong with the Pentax threading. Visually, however, I can see nothing wrong.
Anyone out there ever hear of such a problem? If not, does anyone know whether any competent machinist can check the eyepiece threads and potentially fix the problem, or whether I will have to take this to a specialist?
Thanks -- Darrell