Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

Mirror transport

Started by progenitor, 07/04/2006 04:57AM
Posted 07/04/2006 04:57AM Opening Post
I was recently on a week trip around AZ/UT with my 16" reflector.
I still keep the 3 layer hard foam sandwich and (optical?)
paper cover that the mirror was sent in. With daily changes of
camping place, it became apparent that for the field trip, this
storage is not optimal. I was concerned about hard dust coming between
the mirror face and the paper (we awakened with red sand covering the
sleeping bags after a windy night in Monument Valley). I kept the box
with the mirror on its side thinking that the foam gives better
cushioning to the road bumps in this position. My scope has a very
open mirror box and with its mirror support (whiffle tree and cable)
it is not deemed to keep the mirror inside during longer transport.

I am thinking about some wooden/plastic tight box for the mirror
storage and transport but have not a clear idea about the inside arrangement.
How are other people solving this problem ?

Thank you,

David
Posted 07/04/2006 06:15AM | Edited 07/04/2006 05:07PM #1
I use a mirror cover and leave the mirror in the scope.
Forgot to state that the cover is held in place with Velcro so that it does not move, plus there are cut-outs that fit over the mirror clips that hold it in position.

Attached Image:

fblue's attachment for post 105082

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 07/04/2006 04:51PM #2
You do NOT want to put "optical paper" or anything else on the coated surface of the mirror.
I have always felt that transporting the mirror separately and inserting/removing it in the field is an invitation to disaster.
I always build a mirror box that can be covered and safely hold the mirror during transport.