Image of the day

Captured by
Michael Scherman

M17 Swan-Omega Celestron C6 Hyperstar2

My Account

New to Astromart?

Register an account...

Need Help?

setting up a new astrosky

Started by trdoug, 07/12/2006 07:15AM
Posted 07/12/2006 07:15AM Opening Post
I took delivery of my 16" f/5 astrosky (woden) reflector. My first scope was/is an Orion which, being a beginner, meant I took it out of the box and used it. I didn't get concerned with alignment other than collimation, in the roughest sense. That Orion mirror cell was a major PIA to adjust. Sooooo...I'm now learning how to set up a sling type mirror cell, mark the secondary and primary, and check to see that the focuser is square. I think I've got a handle on the first two, but checking for square on a truss dob seems to lose me. I can easily check to see that the laser dot on the opposite side of the tube is the same distance from either end, but how can I assume that the measuring points, opposite the laser line, both lie in the plane that is perpendicular to the optical axis? :S

Oh yah, man a 16" f/5 is bigger than a picture would let on. So far, that's a good thing. :b

After I get through all the set up I'll do my best to share my experience with Astrosky ie James.
Posted 07/12/2006 04:28PM #1
Doug,
Do you have a site tube? If not then a 25mm film canister will do. Just take the film canister and cut the bottom off evenly. Then take the cap and drill a 1/8" hole where the dimple is located in the center of the cap. Then slide it in the focuser and peek through the small hole. This will aid in seeing where the secondary is located in relation to the focuser. You want to see the secondary appear as a round mirror that is centered in the focuser barrel. Note whether the barrel sides look the same when doing this so that you are not looking at an angle. When you see this arrangement then the secondary is properly positioned. If needed you can level the focuser to get the side to side adjustment, but the focuser boars should be pretty square.
Looking forward to your review of the scope. grin

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager