Image of the day

Captured by
John Roach

Enhanced Uranus showing Polar Cap and possible Aurora

My Account

New to Astromart?

Register an account...

Need Help?

TEC200ED Owners

Started by lthaxton, 10/07/2016 01:51PM
Posted 10/07/2016 01:51PM Opening Post
I recently acquired one of these beautiful scopes and was wondering what other owners may have learned using theirs. My plan is to use it primarily as a visual scope and I intend to install it in a rolloff structure on a permanent pier and a Losmandy HGM-200. Any advice on pier height? I am leaning toward a 54" tall pier so there is adequate height for comfortable, seated observing.

In order to raise the tube in the saddle I plan to mount an auxiliary scope on a second set of tube rings via Losmandy guide scope rings. I have an FC-76 and a couple of 4" APOs but am curious what others have done, or how much weight was needed.

Any thoughts or suggestions would be much appreciated!
Posted 12/21/2016 07:01PM #1
Derek Wong has one of these setup in his private observatory.

Aravind

larry thaxton said:

I recently acquired one of these beautiful scopes and was wondering what other owners may have learned using theirs. My plan is to use it primarily as a visual scope and I intend to install it in a rolloff structure on a permanent pier and a Losmandy HGM-200. Any advice on pier height? I am leaning toward a 54" tall pier so there is adequate height for comfortable, seated observing.

In order to raise the tube in the saddle I plan to mount an auxiliary scope on a second set of tube rings via Losmandy guide scope rings. I have an FC-76 and a couple of 4" APOs but am curious what others have done, or how much weight was needed.

Any thoughts or suggestions would be much appreciated!
Posted 02/26/2017 01:54PM #2
Larry, as it's been a little while, I'm curious as to your impressions of the scope.

Jeff

"Don't sweat the petty things and don't pet the sweaty things" 8O
Posted 11/20/2022 11:35AM #3
He must not like it? Let me know if you want to sell and I’ll drive up to Bend.