Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

12.5" DOB refinishing

Started by fblue, 02/11/2004 06:03PM
Posted 02/11/2004 06:03PM Opening Post
I am 1/2 way done with the refinshing of my new aquired 12.5" f/4.8 DOB. It is coming out well. I have had to repair a few chips and replace the Alt bearing Ebony Star surfaces.
I have had to make a new focuser board to mount the JMI in place of the original R&P focuser. This was easier than making new truss tubes. :^) I am moving the secondary away from the primary and moving the focuser up the focuser board to accomplish this replacement. I will also be looking to move the primary down as much as possible. The old focuser was 7" tall fully racked out!
I got to view through it before I tore it down and it was very good. So it will be worth all the effort.
I plan on using velvet to line the entire secondary cage and the hole through the focuser board.
I have repainted the truss and secondary tubes flat black.
All black surfaces are going to match the color of flat black which is an attractive dull satin. The rest is being sanded to the wood and then recoated with Satin Urethane. I am working and getting it very smooth and furniture like in finish.
I will post pictures when it is finished in a couple of weeks.
Floyd

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager