My first mirror is coming along. I'm using an 8" Pyrex blank full thickness and an 8" plate glass tool. Tonight I made it down to 12 micron and finally started with 5 micron. I'm having issues with the two wanting to lock together when I work the air bubbles off the edge. I have found that rapidly moving whatever is on-top and only sliding bubbles off the edge when using a center-over-center motion that I don't feel it begin to seize. Thankfully I've always been able to prevent them from locking together. I'm using a wee bit of soap and that seems to help. Any other suggestions??
~ Charlie Stevenson
8" f/5.7 String Telescope - 1st Scope Build; 2nd Place Stellafane 2016 Optical Award for Newtonians 12.5" and Smaller
10" f/4.5 Newtonian (June 2015) mirror refigured by Optic Wave Labs P-V WaveFront 1/14.24, Strehl Ratio 0.993 (Aug '15)
Criterion RV-6 seems to be circa 1973 (June 2015) [For Sale]
Celestron C8-A XLT (January 2015) [For Sale]
Celestron PowerSeeker 70AZ (Christmas 2014)
Aldrich Astronomical Society member since 2015
http://astro.charleskelleystevenson.com/