Alt. Bearing Size?

Started by thornbe, 11/19/2003 02:46PM
Posted 11/19/2003 02:46PM Opening Post
What size alt. bearing should I use for a 12.5" truss style scope. I have heard the bearing should be at least the dia. of the mirror size. I was thinking even bigger. My mirror box will be around 17" x 17". A 12.5" bearing would look really small against the mirror box.

Thanks in advance,

Tim Hornbeck
Posted 11/19/2003 03:28PM #1
A bearing that size would only be showing 2.25" of box on either side of the bearing, it wouldn't look that small really.

IMO once you get above the mirror-size level, the size of the bearings starts to depend on what you'd like the telescope to look like more than anything else. 12.5" bearings will certainly be adequate for a 12.5" scope. But if it would look odd to you, then you should make them bigger. :-)
Posted 11/19/2003 03:31PM #2
According to the table in the booklet- A Guide to Building Truss Tube Telescopes, by Randy Cunningham (of Astrosystems) he recommends an altitude bearing size of 18" diameter for a 12.5" telescope.