Image of the day

Captured by
Arthur Hogan

Wizard Nebula

My Account

New to Astromart?

Register an account...

Need Help?

Bent Newt secondary question

Started by hakescl, 11/15/2003 01:54PM
Posted 11/15/2003 01:54PM Opening Post
I am finally bending the light path in my 10" f9.6 dob. I am going to put the focuser at 45 degrees, so the secondary will be tilted at 22.5. My question is about the secondary size. I have played with "Newt" a bit and obviously Newt wants a 90 degree bend in the light. (I must use the at-work computer until he comes up with the Mac version.) Does it work to just say the focuser is just sqrt(2) farther away? Are there other considerations I need to make?

I have a Surplus Shed "oval" flat mirror that I got for this project. I guess I will know when it all gets put together how it will work. I just wanted a little more "theory" behind my construction effors to know if I need a different secondary.

Thanks,
Charlie

Fort Lewis Observatory: (37.238, -108.052) ~2360m (7744 ft.) elevation.
Darkness - typically 6.5+
Scope - Meade 16" LX200; f6.3 focal reducer
Focus - JMI Smart focus
Camera - SBIG ST-10XE; (~.5"/pixel)
Guiding - AO-8 and/or Meade 5"/DSI/PHD
http://www.fortlewis.edu/observatory
Posted 11/16/2003 03:21AM #1
You could make a full scale representation of your light cone using butcher paper and fold it to simulate your intended design. Measure at the fold(s) to determine the size of the mirror(s) that would be required.
Posted 11/16/2003 04:11AM #2
"Does it work to just say the focuser is just sqrt(2) farther away?"

Yes. That's the general idea anyway.

"Are there other considerations I need to make? "

Well, your focuser will take up more space because it will be tilted at 45 degrees. So to keep it out of the light path you must add 1/2 the width of the focuser to the height of the focuser. (or account for the distance some other way, like the thickness of the "tube")

Kevin