Image of the day

Captured by
Arthur Hogan

Wizard Nebula

My Account

New to Astromart?

Register an account...

Need Help?

Ebony Star discontinued?

Started by fblue, 01/13/2006 11:10PM
Posted 01/13/2006 11:10PM | Edited 01/13/2006 11:12PM Opening Post
Today I went down to a local counter top fabricator that I get stuff from occasionally. I was looking for some Ebony Star or pebbled Formica to do a little work. He had about a half sheet of Ebony Star and some of a light colored similar pebble surface. He sold me the material for $5, which is very cheap, but this guy is always very helpful and friendly.
He went on to tell me that this was the last of it because he is unable to find any more anywhere! He said the lighter color had been discontinued a while back and that it started getting scarce just before they announced it was discontinued. He said that he could not get confirmation that it was indeed discontinued, but they have begun a new style of pebbled Formica and he is sure it is just going to take it's place. The problem is, the new stuff is $5 a square foot! 8O
So, if you use Ebony Star, you might want to stock up on it while you can. It just may be impossible to get shortly.
I did use a piece of the lighter colored stuff to make a sheet for the AZ bearing on the 10" Orion XTI. It worked really well and improved the movement to a great degree! I mean, now I would consider it to be "Just Right", where before it was just a bit too stiff for my liking. Now it is nice at zenith and anywhere else in the sky. Great thing to do to one of the GSO or other scopes being sold without Ebony Star and just using the material used to cover the particle board.

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 01/14/2006 05:53AM #1
The actual description of Ebony Star is "high pressure plastic laminate" or, hppl, or, simply, P-lam.

There are many manufacturers of hppl, including Formica, Wilson Art [who make Ebony Star], Textolite, Pionite, etc.

Melamine is low pressure plastic laminate, a thinner and somewhat softer product.

I'll check with my suppliers to see if Ebony Star will continue to be available; if not, there may be other laminates which feature the pebbled texture which made Ebony Star so useful.

James Adams
Posted 01/14/2006 07:12PM #2
One thing that I have learned about Wilsonart's Ebony star is that it is a color or pattern, and not limited to one singel finish (or texture) The texture (or finish) of the laminate is was ATM's are looking for, and IIRC the texture we talk about is what Wilsonart calls a #50 finish. It is available on many colors of the laminate. So even if they do discontinue Ebony Star, as long as the finish #50 is available we should be ok... The catch is that the #50 finish is no longer listed with the standard finishes, but seems to be replaced with the #60 finish.

Just an fyi..

Jack
Posted 01/14/2006 10:57PM #3
I saw your message today, went to my local Home Depot in a panic and ordered a sheet for $2.83 per sq ft. Ebony Star wasn't crossed off his list, so presumably they still have some in stock; I'll find out for sure in a week or two. The salesman didn't know anything about it being discontinued, but he didn't seem to know much about anything else so I wouldn't be too sure.