Image of the day

Captured by
Bruce Karbal

VDB 142 Elephant Trunk HOO

My Account

New to Astromart?

Register an account...

Need Help?

Lead plate sources for counterweigh

Started by progenitor, 06/15/2006 05:50AM
Posted 06/15/2006 05:50AM Opening Post
My 16" Dob is not balanced well enough binoviewing with current 9 lb of lead in the form of ca. 2.5x2.5" squares 0.5" thick which are attached by industrial Velcro pads (glue fell anyway off in hot FL weather at WSP) to the bottom of the mirror box.
I am looking for lead source in plate form, where...?
Posted 06/15/2006 02:35PM #1
David
You could get lead in any form you can find and melt it on a stove. Use a SS sauce pan in the diameter you wish then keep adding lead until you get the thickness you need, remove from the heat and let cool, then dump it out.
Buck
Posted 06/15/2006 04:40PM | Edited 06/15/2006 04:40PM #2
I went down to the local metal yard and for $2 a pound they sell stainless steel plate. I found a cut off that was the weight I needed and just mounted it. I needed 3.4 lbs with that one. Lead is a lot more than $2 a pound if you can find it. They don't sell lead in California, or at least that is what I am told.
They also sell regular steel for much less and it is easy to paint to make it the color you would like. Lots of cut off pieces laying around there to choose from and they have the scale to use.

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 06/15/2006 06:39PM #3
http://www.mcmaster.com/ has ingots and bricks for < $3/lb. Other shapes are more expensive.

http://www.nuclead.com/lead_products.html?gclid=CJ-RxNf5yIUCFTROGAodB0nBsw might also be useful, but you'll have to call them for more info.

Allen
Posted 06/16/2006 04:33PM #4
Scuba weights can be useful for counterweights....they come as square slotted chunks of lead from 1 to 6 lb, and as nylon fine mesh bags of lead shot weighing 1, 2, and 4 lbs. The bag-type weights are nice because they will stick to the hook side of velcro. You can just pop them on and off as needed, and if you drop one it won't break your mirror or your toes.

Tim
Posted 06/16/2006 06:54PM #5
Thanks for the suggestions, I need to make some quickie solution for the GCSP but will use some ideas later for more esthetical design.