Meade 114NT MONSTER project

Started by BoyntonStu, 04/10/2006 11:34PM
Posted 04/10/2006 11:34PM Opening Post

My project is to use the Meade 114NT as a test bed for the things that I would want in a Newtonian telescope of any size.

I have made some progress:

1> The pipe mount with 2 axis balancing is a very stable, low for comfortable viewing, smooth, and portable.

2> The finders are in a great position and I was very lucky to find an extremely lost cost (Home Depot $15.00) 'setting circle' finderscope aimer.

3> I was able to create primary adjustment 'knobs' for under $1.00. Just buy 40mm long metric Hex cap screws and fabricate a 3/8" spacer. Replace 1 screw at a time. It takes 3 minutes to exchange them. No tools needed to turn the 'knobs', fingers will do it. (Remove 1 screw and bring it to your harware store for a match). I cut a piece of aluminum tubing for the spacers.




The EP moves only about 10" from horizon to zenith and I can be in one sitting position for all elevations.

I love to find off-the-shelf dual purpose items. In this case HD has a tremendous sale on these laser levels with tripod and safety goggles included for an amazing 15 bucks.
Get them before they are gone!

Photos of everything to follow:

Stu

Attached Image:

BoyntonStu's attachment for post 30893
Posted 04/10/2006 11:35PM #1
Finder Board

Attached Image:

BoyntonStu's attachment for post 102631
Posted 04/11/2006 06:05AM #2
Looks good now that I can see the whole magilla. I'm working at it from a slightly different angle. I'm building a small Dobs mount that will pivot around a central 2" pipe pier.

When I've got her done (hopefully soon) I'll take a few pics and post'um.

The "star" we look at tonight may have exploded millenniums ago. (To progress, we must discern what exists and what does not).
Posted 04/11/2006 08:10AM #3
[COLOR="Blue"]
Stu Lieberman said:
......

1> The pipe mount with 2 axis balancing is a very stable, low for comfortable viewing, smooth, and portable.

2> The finders are in a great position and I was very lucky to find an extremely lost cost (Home Depot $15.00) 'setting circle' finderscope aimer.

3> I was able to create primary adjustment 'knobs' for under $1.00. Just buy 40mm long metric Hex cap screws and fabricate a 3/8" spacer. Replace 1 screw at a time. It takes 3 minutes to exchange them. No tools needed to turn the 'knobs', fingers will do it. (Remove 1 screw and bring it to your harware store for a match). I cut a piece of aluminum tubing for the spacers.

The EP moves only about 10" from horizon to zenith and I can be in one sitting position for all elevations.
...
Stu
[/COLOR]

Hi Stu,

Nice way to solve the collimation problem on the little four and a half. I will have to look for the settng circle finderscope aimer at HD. I like the offset counterweight to get the ep. of the scope near the axis. It think something like this was done for GE mounts a long time ago, but it put the counterweight next to your head. (Springfield mount?)

David Simons