Here's a picture of my 12.5" mirror. I finished #400 grit. I'll be moving on to the #800 soon.
I had gotten to #800 once already but got a nasty little scratch. I'll have to be more careful to clean out all the little crevices from the tool. I learned the hard way that the "sucking" action with such close contact between mirror and tool at that stage sucks some hidden grains of old grit into action.
But it was just as well. I decided to go back to #100 grit and grind down the sagitta a bit more. Now I'll have a f/5.9 mirror instead of a f/6.6 mirror.
Clears,
Joe
I had gotten to #800 once already but got a nasty little scratch. I'll have to be more careful to clean out all the little crevices from the tool. I learned the hard way that the "sucking" action with such close contact between mirror and tool at that stage sucks some hidden grains of old grit into action.
But it was just as well. I decided to go back to #100 grit and grind down the sagitta a bit more. Now I'll have a f/5.9 mirror instead of a f/6.6 mirror.
Clears,
Joe
Attached Image:
In lumine tuo videbimus lumen.
8O Home-made 10” Dob / Home-made 4” refractor
EPs: Konig 32mm (1.25") / Zhumell WF 30mm (2") / Nagler 13mm T1 / Orion Sirius Plossls 25 & 10mm / Zhumell Plossl 9 mm / Meade MA 9mm