Image of the day

Captured by
Arthur Hogan

Wizard Nebula

My Account

New to Astromart?

Register an account...

Need Help?

Re: TrussTube Mtg Brkt

Started by bstratton, 04/14/2003 12:44AM
Posted 04/14/2003 12:44AM Opening Post
Steve,can you explain further, this is an interesting design. You cut a 2" dowel and inserted into the tube- was it snug? Then you drilled a hole up through the dowel. Then you cut the dowel on a bias to make two wedge shapes? Please explain. Do you mean you cut the dowel inside at an angle and put a t-nut on the top wedge?

Brien
Posted 04/14/2003 02:13AM #1
Yes, thanks Steve, that was quick, you must be a draftsman. Great idea. I have not seen this before for truss scopes. I have seen this type of thing in other applications outside of astronomy.

Brien
Posted 04/14/2003 03:31PM #2
I like this design.

Questions - When you tighten down on the 10-24 flat head, why doesn't the entire dowel turn inside the tube? Do you have to hold it secure somehow until it grips well? Or is the one section of the dowel glued to that end bracket?

Charlie

Fort Lewis Observatory: (37.238, -108.052) ~2360m (7744 ft.) elevation.
Darkness - typically 6.5+
Scope - Meade 16" LX200; f6.3 focal reducer
Focus - JMI Smart focus
Camera - SBIG ST-10XE; (~.5"/pixel)
Guiding - AO-8 and/or Meade 5"/DSI/PHD
http://www.fortlewis.edu/observatory