Well, after 15 years in this hobby and building a few scopes, I'm finally getting up the nerve to build a truss! I had thought about my old 12.5" f/6 split-tube (made yearssss before I saw any on the market that way...groan)but all the angle calculations and making blocks for the poles made me run the other way. Well, two years ago I sold my 12.5" and with some money given to me by the passing of my grandfather (who liked talking about this hobby) I bought my dream 16" dob (more for a deal on the mirror than anything else). I've told myself for years (as well as my wife has too) that 16" was the maximum I could work with comfortably. I got the Discovery split-tube dob (always been a dob man), and really didn't have any problems with it until recently. I mean, it did BARELY fit in my CRV, and I could JUST lift it out of the cradle, but hey...I'm....young. Well, I tried two days ago and I about killed myself and the OTA slipped/fell out of my hands back down into the rocker box! That's it....it's time.
Well, my question is this...is there any advice that you can give me? I bought Moonlight poles and double ball joint blocks to ease my angle issue/nerves. I ordered two new pieces of sonotube for the upper and lower assembly (as a safety issue instead of cutting up the existing tube). I'm not a fan of the traditional cage and box design for a truss, and like the sonotube/truss/rockerbox combo, kind of like the Meade Lightbridge. I don't have a router, so I know a furniture maker who is making me four endrings so I can attach the hardware. Unfortunately, I'm one of those builders that eyeballs alot, and I'm taking a gamble on where I think the balance point will be. Nicely enough, the Discovery altitude bearings are on a metal slip sleeve for adjustment, so I can nicely tuck a 5 lb weight behind the bearing out of sight. My upper "cage" is 17" long, with 3 ft. of pole, and 21" on the lower mirror housing. I'm going to re-cut the rocker box once I put everything in the OTA and find the balance point. I've attached an image of the scope as it currently is so you can see the beast I'm working with.
All advice and tips are most welcome!
Thanks,
guy
Well, my question is this...is there any advice that you can give me? I bought Moonlight poles and double ball joint blocks to ease my angle issue/nerves. I ordered two new pieces of sonotube for the upper and lower assembly (as a safety issue instead of cutting up the existing tube). I'm not a fan of the traditional cage and box design for a truss, and like the sonotube/truss/rockerbox combo, kind of like the Meade Lightbridge. I don't have a router, so I know a furniture maker who is making me four endrings so I can attach the hardware. Unfortunately, I'm one of those builders that eyeballs alot, and I'm taking a gamble on where I think the balance point will be. Nicely enough, the Discovery altitude bearings are on a metal slip sleeve for adjustment, so I can nicely tuck a 5 lb weight behind the bearing out of sight. My upper "cage" is 17" long, with 3 ft. of pole, and 21" on the lower mirror housing. I'm going to re-cut the rocker box once I put everything in the OTA and find the balance point. I've attached an image of the scope as it currently is so you can see the beast I'm working with.
All advice and tips are most welcome!
Thanks,
guy
16" f/4.52 ATM Truss Dob, Discovery Mirror
Denk II w/nags junkie