Image of the day

Captured by
Ruben Tommasi

Andromeda Galaxy (M31)

My Account

New to Astromart?

Register an account...

Need Help?

Spider and secondary mount... Cheap

Started by jonisaacs, 05/20/2008 05:57PM
Posted 05/20/2008 05:57PM | Edited 05/20/2008 05:58PM Opening Post
Hi:

I have cute portable 6 inch F/5 DOB. It was originally a kit scope, a Mirascope, I bought it used. The mount is very sweet with all Ebony Star/Teflon bearings.



My problem is that it came with a stalk type secondary mount and I would like to use a 3 or 4 vane spider with an easily adjustable secondary so I can nail the collimation.

Twice I have placed a wanted ad for a secondary and spider but no luck. University Optics no longer sells them, Protostar has a nice one that would be about $80, a bit much probably for this scope so I am looking for a less expensive solution, either something I could easily build or something I could buy...

Any idea would be appreciated...

jon

Attached Image:

jonisaacs's attachment for post 42134
Posted 05/20/2008 08:13PM #1
How about this one?

http://www.rfroyce.com/spidrunq.htm

dan
Posted 05/20/2008 10:59PM #2
Jon--

I like this spider design by steve swayze:

http://www.europa.com/~swayze/spider/spider.html

you'll have to work out your own secondary holder though!

Another idea that worked well came from an S&T article (December 2001) on a portable 8" --this uses a typical steel ruler for a curved spider--it's very easy to build, a bit trickier to install, and avoids the usual 3-point collimation screws--something that gets hard to fabricate for smaller secondaries.

--george

George Golitzin