Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

Stuffing behind secondary mirror...

Started by jonisaacs, 11/16/2009 11:56PM
Posted 11/16/2009 11:56PM Opening Post
Many secondary mirror supports such as the Novak are a thin sheet metal cylinder and the mirror is held against a thin lip with some stuffing behind it. I have always assumed that the stuffing was glass wool but I don't really know. The club here at school has everything but the stuffing and need some help.

Any suggestions for a material and/or supplier would be helpful.

Thanks

Jon
Posted 11/17/2009 12:03AM | Edited 11/17/2009 12:04AM #1
Hobby shops and places like WalMart carry batting. This is used for things like stuffing stuffed animals and pillows. Unfortunately you will probably have to purchase a bag of the stuff that would be enough for a thousand telescopes! Fortunately, it is cheap! grin Stay away from cotton because it will absorb moisture. The batting is some type of synthetic that will not absorb moisture. I have seen scopes where someone stuffed tissue paper in there to take up the space. That is really its only purpose - to fill in the void and keep the secondary firmly seated.
Posted 11/18/2009 07:02PM #2
I've used the pillow batting from WalMart, as others have mentioned.

Trick is to not use too much. I've bought several scopes
with too much batting behind the secondary and obvious
astigmatism as a result. There seems to be a fine line between
too little pressure (doesn't hold collimation) and too
much pressure (warping / astigmatism).
Posted 11/24/2009 02:33PM #3
I'm surprised nobody has questioned if you really want to insulate the cavity behind the secondary. Heat retention and all that.

Jeff

"Don't sweat the petty things and don't pet the sweaty things" 8O