Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

Taking the plunge

Started by asterhunter, 11/26/2007 02:17AM
Posted 11/26/2007 02:17AM Opening Post
Hi everyone,
I never had any real interest in making my own telescope, and still don't really. But I've had something dumped in my lap. My brother-in-law, who works at Pisgah Astronomical Research Institute in North Carolina, knows someone who has been making his own telescopes since he was a teenager. That was around 1930! To make a long story short, at age 89 he is moving from NC back to New England to be with his family, and he had a bunch of his old ATM stuff that he did not want to take with him. Would I be interested in taking it off his hands? YOU BET! Among the boxes and boxes of goodies, I have enough parts to build my first Dobsonian telescope: a fully polished and silvered 6" mirror, a 4' steel optical tube with predrilled holes, focusers and mirror blanks. What I need now is some ideas on good books for beginner ATM, especially ones with instructions about building Dobs. I'll need to buy and make a few telescope parts, and hope to get this one started this Spring. Thanks for the help.

David E
Posted 11/26/2007 04:03PM #1
why not build a 1930's vintage atm scope? You will already have most if not all the parts you need. You could contact the gentleman who first put this all together and find the original design, nad make a new ATM friend. You could use as much of the original materials and fasteners and end up owning a very unique and interesting scope. An opportunity and a challenge. Your other choice to make a "modern" 6" scope will simply be lost in the crowd of average scopes.

Have fun, Kreig