Image of the day

Captured by
Ruben Tommasi

Andromeda Galaxy (M31)

My Account

New to Astromart?

Register an account...

Need Help?

Use Gatorboard in telescope construction?

Started by djscobel, 04/19/2005 09:15PM
Posted 04/19/2005 09:15PM Opening Post
Has anyone tried using Gatorboard in telescope construction? Gatorboard is a very light weight material like foamcore board, but is much stronger and has more stiffness. It is commonly used for graphics displays. It comes in various thicknesses, but I would think the most applicable sizes would be 3/16", 1/2", and 3/4". For example, one could make an extremely lightweight yet strong secondary cage for a truss dob using it. Maybe other components as well.

I think the trick would be making it weatherproof.

Just a thought,
Doug
Posted 04/20/2005 04:19AM #1
I'm not familiar with Gatorboard, but Albert Highe has a telescope that uses a lightweight structural composite panel to build a 40-pound 12 1/2 inch dob. It's a good read:

http://ultralightscopes.com/MarkIV.htm
Posted 04/20/2005 05:55AM #2
I'm not personally familiar with Gatorboard, but I have seen pictures of telescopes built with Gatorboard. Other composites I have seen people using is Alucobond (I think that's the right name) and Alumalite. I built my 16" telescope with Alumalite.

Kevin
Posted 04/20/2005 12:19PM #3
Gatorboard is a high density foam board, laminated on both sides with a heavy posterboard-like covering. Here's a link to just one of many places that sell it (no sales plug, just the top of the list when I googled "gatorboard"):

http://www.backgroundstobasics.com/pages/gatorboard.html

I was recently at a graphics art place and the guy had this stuff all over his shop. It is very light and appears to be very rigid. Seems like an ideal telescope making material, especially where you want to save weight.

Doug