Image of the day

Captured by
Bruce Karbal

VDB 142 Elephant Trunk HOO

My Account

New to Astromart?

Register an account...

Need Help?

Cassiopeia, Andromeda, Perseus in Canon P & S digi

Started by Exosearch, 11/22/2008 05:24AM
Posted 11/22/2008 05:24AM | Edited 11/22/2008 05:33AM Opening Post
Keeping in mind that this is from a point-n-shoot camera, here are Cassiopeia and parts of Andromeda and Perseus

http://setisociety.org/Cassiopeia-Canon-sx100-4fr-ado.jpg

One can barely make out double cluster and M31 (if full sized M31 looks like a tiny faint Saturn above Cassiopeia) and some other stuff too.

No scope, Canon SX100-IS camera, 4 frames, ISO 1600 at F/3.5 (I wish I had done it at F 2.8 but at the time I didn't know the camera well-enough to know that I could adjust it and keep the zoom at the same position in Manual mode :^0 ), stacked in Registax 4, post-processed in Adobe PhotoDeluxe, used the Home Depot mechanical timer mount to hold the camera for tracking.

Regards, Jason H.
Posted 11/23/2008 05:11AM #1
That is nice - REALLY wide. You can see both M31 and the double easily, and I suspect that other things would show up if I knew just where to look. If you had moved at bit "up" I am sure M33 would be there too.

I would only wonder about the 2.8 to know if the stars are still round. My experience with "regular" (Canon) lenses is that stopping down wouldn't hurt. I have done some shots with a point and shoot, but never tried combining/post-processing anything. May be something to do now that it is dark so much.

Charlie


Fort Lewis Observatory: (37.238, -108.052) ~2360m (7744 ft.) elevation.
Darkness - typically 6.5+
Scope - Meade 16" LX200; f6.3 focal reducer
Focus - JMI Smart focus
Camera - SBIG ST-10XE; (~.5"/pixel)
Guiding - AO-8 and/or Meade 5"/DSI/PHD
http://www.fortlewis.edu/observatory