Hi all,
I've been spending quite a bit of my very limited imaging time trying to optimize my setup. I'm happy to report that my Ovision modified G11 is tracking great (~ 4" peak to peak). After significantly improving my polar alignment I can now do 4 minute (one complete worm cycle) unguided exposures (at FL~1100)which look quite good. I have been able to improve the tracking to just under 2" peak to peak with PEC, however I discovered that my Gemini L4.100 does not remember where it is in the worm cycle after a power down (doh!) I have just received the updated EPROM which will solve this issue, but I am waiting until the next full moon to install and test it. My autoguiding has also noticeably improved. Anyway, now that the system is behaving better, the weather has not really cooperated. The clouds parted for a couple of hours this week which allowed me to get some data. The transparency was 2/5 and seeing 3/5.
M13
25 x 2 minutes luminance; binned 1x1; guide interval = 3 sec; 1.26" / pixel
AP 130mm F8.35 (I love this scope!)
ST-10XME; CFW8a with Astrodon E-series filters
G11-O
Optec TCF-s
Image was collected using CCDsoft; focus with focusmax. Calibrated, aligned, data reject and initial processing in CCDstack. Levels, slight curves and saved for web in Photoshop.
I know its not the best, or most interesting image, however the tracking, I think, looks quite good and bodes well for future imaging sessions.
Let me know what you think.
cheers,
Jeff
I've been spending quite a bit of my very limited imaging time trying to optimize my setup. I'm happy to report that my Ovision modified G11 is tracking great (~ 4" peak to peak). After significantly improving my polar alignment I can now do 4 minute (one complete worm cycle) unguided exposures (at FL~1100)which look quite good. I have been able to improve the tracking to just under 2" peak to peak with PEC, however I discovered that my Gemini L4.100 does not remember where it is in the worm cycle after a power down (doh!) I have just received the updated EPROM which will solve this issue, but I am waiting until the next full moon to install and test it. My autoguiding has also noticeably improved. Anyway, now that the system is behaving better, the weather has not really cooperated. The clouds parted for a couple of hours this week which allowed me to get some data. The transparency was 2/5 and seeing 3/5.
M13
25 x 2 minutes luminance; binned 1x1; guide interval = 3 sec; 1.26" / pixel
AP 130mm F8.35 (I love this scope!)
ST-10XME; CFW8a with Astrodon E-series filters
G11-O
Optec TCF-s
Image was collected using CCDsoft; focus with focusmax. Calibrated, aligned, data reject and initial processing in CCDstack. Levels, slight curves and saved for web in Photoshop.
I know its not the best, or most interesting image, however the tracking, I think, looks quite good and bodes well for future imaging sessions.
Let me know what you think.
cheers,
Jeff
Attached Image: