This image was shot with my dual setup on the new 1600 mount. I have a 10" Mak-Cass on one side and 175 EDF refractor on the other. I recently posted a wide field image taken with the 175 operating at F 6, 1050mm FL.
This image was taken with 3 narrow band filters thru the 10" at F14.6, 3708mm FL. Camera was the QSI 683. The seeing varied from 1.9 arc sec to 3.5 arc sec FWHM.
I am totally convinced that I could have recorded much higher resolution if this scope was located down in Chile in the mountains, or even in the Florida Keys, but alas, I had to make do with the object barely rising above 25 degrees, and shooting into severe light pollution right over a huge shopping center with lots of big box stores.
R = 17 x 300 sec 2x2 bin OIII
G = 38 x 300 sec 1x1 bin H-a
B = 17 x 300 sec 2x2 bin SII
Luminance layer used the H-a exposures.
Rolando
This image was taken with 3 narrow band filters thru the 10" at F14.6, 3708mm FL. Camera was the QSI 683. The seeing varied from 1.9 arc sec to 3.5 arc sec FWHM.
I am totally convinced that I could have recorded much higher resolution if this scope was located down in Chile in the mountains, or even in the Florida Keys, but alas, I had to make do with the object barely rising above 25 degrees, and shooting into severe light pollution right over a huge shopping center with lots of big box stores.
R = 17 x 300 sec 2x2 bin OIII
G = 38 x 300 sec 1x1 bin H-a
B = 17 x 300 sec 2x2 bin SII
Luminance layer used the H-a exposures.
Rolando
Attached Image: