Image of the day

Captured by
Ruben Tommasi

Andromeda Galaxy (M31)

My Account

New to Astromart?

Register an account...

Need Help?

GEM Mount for a Orion 10"f5 Newt suitable for ccd

Started by moutinho, 11/29/2004 11:30AM
Posted 11/29/2004 11:30AM Opening Post
Hi,

What mount should I use with a Orion 10" f5 Newt OTA in order to do long exposure CCD astrophotography. How will be the portability of such mount ?

Thanks,
Andre Moutinho
Posted 11/29/2004 08:13PM #1
I'm in the process of setting up an astrophotography rig holding similar weight as a 10" f/5 newt and here is what I'm doing.

I using a Losmandy G11 with Guidedog software and a Philips ToUCam with a 90mm Maksutov spotting scope as my autoguider. I think you're going to have a problem finding an easily portable mount for a 10" newtonian setup. The Losmandy G11 would work great for your scope and reasonably easy to transport but it's heavy! If you want a mount that's portable and capable of long exposure astrophotos you might need to step down in scope size to a 8" newt or 4" refractor and look at the new Vixen Atlus or Losmandy G8 setup. If you step down in scope size you might even try the chinese made Meade LXD75's with the hypertune kit but... Possibly these lighter mounts Vixen Atlus or GM8 or LXD75 might be good enough for astrophotography with a 10" newt but you're walking a fine line. Just remember the ability to accept an autoguider is going to be critical for your application. If you buy something like the Losmandy G11 or an Astrophysics you'll be happy with the outcome. If you get a $500 or $600 chinese clone mount you may or may not be happy with the outcome... If you're planning to do a lot of 30 second stacks versus long exposure you can get away with a cheaper mount.