Image of the day

Captured by
Shane Yarnall

LDN 1622

My Account

New to Astromart?

Register an account...

Need Help?

k3ccd tools help

Started by troy93955, 02/13/2004 02:54AM
Posted 02/13/2004 02:54AM Opening Post
Hi,
I am tools. I have a modified Quickcam 4000 per Steve Chambers
mod. However I cant get a display or picture displayed on my laptop
when I open K3CCd. When I use the software that came with the camera
it works fine. Can anybody help. Needless to say I am very frustrated.I get an error that video source is not detected.
thanks Troy


Posted 02/13/2004 04:20AM #1
Troy,
I have had problems with K3CCD not recognizing my ToUcam after running K3CCD without the camera attached to the USB port. I got the same message regarding not detecting a video source. I could never figure out what the K3 tools were doing (I assume it notes the absence of the camera in a file somewhere). The only solution I found that 'corrected' this condition was to re-install the K3CCD tools from scratch WITH THE CAMERA ATTACHED. I never execute K3CCD without it attached.

-Gary
    There is only one constant in our infinite universe; it is change.
    D&G 8” f/15, AP178 f/9, C11, C8, ED80, TV-85, TV101&102, SW120ED, 6"Cave f/8, Solarmax 40, ES127MC,
    DM-6, Losmandy Titan 50 GEQ, G11, AP800, ES Twilight-1, UA Unistar Deluxe, WO EZ-Touch, 
    Denk BVs, 7x50 Fujinons, 10x50 Nikons, 15x70 Astrophysics, 16x70 Fujinons, 22x100 Oberwerks, 
    Sim Picheloup CPT, Canon 40D, 60Da, Vixen Polarie, SXV-H9, DMK 41AU02, DBK 21AU618, 
    Shelyak Lhires Lite Spectroscope, Rainbow Optics Spectroscope, Field Tested Systems RSPEC,
    Chairman, Southwest Region of the Astronomical League (SWRAL)
    President Emeritus, Historian, AL Awards Coordinator, Texas Astronomical Society of Dallas (TAS)
    Member/Volunteer, 3RR Comanche Springs Astronomy Campus (CSAC)
    ALCOR, Advisor to the Board, Texas Star Party (TSP)
    NASA-JPL Solar System Ambassador Volunteer (SSA)