I imaged Mars again this morning...only with the Takahashi FS152 6" apo refractor instead of the Celestron C9.25 SCT. This morning was very similar to yesterdays. If there were any difference at all yesterday was very slightly more steady. Even the same side of Mars was captured. This is by no means a scientific comparison. I only did this for fun, out of curiosity, and with hopes to learn a thing or two. One thing that never ceases to amaze me is that the FS152 refractor is much nicer visually and can hold power better, but when it comes to imaging the C9 will maintain crisp images with longer focal lengths over the refractor.
Both scopes were used with a Phillips 840k webcam with a Baader IR blocking filter. The factory Phillips software was used for avi capture @ 20 fps. Registax 2 was used for stacking. Adobe CS was used for processing. I used a Televue 3X barlow with the C9 and for the Tak FS152 I used a TeleVue 4X Powermate and a Denkmeier part S.
I do not wish to start a design/manufacture war, but comments are welcome.
Russell
Both scopes were used with a Phillips 840k webcam with a Baader IR blocking filter. The factory Phillips software was used for avi capture @ 20 fps. Registax 2 was used for stacking. Adobe CS was used for processing. I used a Televue 3X barlow with the C9 and for the Tak FS152 I used a TeleVue 4X Powermate and a Denkmeier part S.
I do not wish to start a design/manufacture war, but comments are welcome.
Russell
Attached Image:
www.flickr.com/photos/61135315@N00/