This was an experiment with a new adapter I had made so that I could use my Takahashi FS-60C with my ST-10 for wide-field imaging. The adapter is not quite perfect, or I had some issues getting everything attached perfectly, as there is some noticable coma in the corners that is more pronounced on the right edge of the image. Part of this is focal point; images through the clear filter did not show this effect. This combination is very sensitive to having the correct metalback distance between the reducer and the chip. I think I can work on it a little more, but I will wait until it's not so cold outside.
Anyway, this is a 180-minute image (9x20m) with an SBIG ST-10XE using a Custom Scientific 3nm Hydrogen-alpha filter. Minimal processing and reduced 50% for this forum. This camera/scope combo should be fun this summer.
Jeff
Anyway, this is a 180-minute image (9x20m) with an SBIG ST-10XE using a Custom Scientific 3nm Hydrogen-alpha filter. Minimal processing and reduced 50% for this forum. This camera/scope combo should be fun this summer.
Jeff
Attached Image:
Jeff 8O