Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

Optimizing a Newt for Astrophotography

Started by Gene, 10/31/2007 03:08AM
Posted 10/31/2007 03:08AM Opening Post
I recently acquired a 14.25" Quartz Obsidian Optics Primary Mirror and matching secondary mirror. The previous owner had the distance from mirror to mirror at 54.5 inches in a dob format. While I will do some stargazing with this scope my main goal is astrophotography.

Are there any article or rules I need to follow during the building process to optimize this? Should I get the mirrors spaced an extra inch closer together or further apart or leave it at original spacing where it was used for just stargazing?

My camera is a modified Canon 350D with a Alpine Astro Coma Corrector.

Posted 10/31/2007 05:31AM #1
The main parameter you need to worry about is the
back focus -- that is the maximum distance from the top of
the focusser to the focal plane. You will want something
like 2.5 inches for your Canon 350D + camera adapter.

If you already have your adapter and camera, you can
measure the required backfocus distance more accurately.
There is a symbol on the camera somewhere that looks like a
line through a small circle (maybe on the side of the
viewfinder for Canons). Measure the distance from
the line to the 2" seat of your adapter (or probably
the seat of the coma corrector). Then add maybe
0.5" to this for safety. Thats how much backfocus you need.

Take the focal length of the primary mirror, and
subtract from this the height of focusser (racked in)
from top to base, subtract the radius of the telescope
tube to where the focusser sits, and subtract the 2.5 inches,
and what is left should be the space between the mirrors.

The size of the secondary mirror is another factor to
consider. You may need a slightly larger secondary mirror
than was being used for visual.

There are various softwares and webtools to help with all
this. One is "Newt for Windows" by Dale Keller
http://www.dalekeller.net/atm/newtonians/newtsoft/newtsoft.htm