SLR camera adapter

Started by moutinho, 11/02/2004 03:53PM
Posted 11/02/2004 03:53PM Opening Post
Hi,

Can I use a SLR Camera adapter to fit into a 1.25" focuser? Or do I need a 2" focuser ?
Thanks,
Andre
Posted 11/02/2004 04:52PM #1
1.25" camera adapters are made for t-mount camera adapters. Check with Orion, Scope Stuff, etc. As a matter of fact, I think I have seen then on the Anacortes site under accessories.

Walt
Posted 11/03/2004 01:34PM #2
The most common camera adapters in fact do fit into 1.25 focusers. They are quite usable. They do suffer some vignetting, but it can easily be cropped out. (And some can be compensated in the computer darkroom.) Just remember that you will be losing some of the image around the edges. But as long as you know that, and compose for it, it is not that big a deal.

I prefer adapters that use and take advantage of 2 inch focusers. Note, however, that they, too, do not offer a 2 inch throughput, since the camera bayonet does not allow for 2 inches--and in fact the camera frame is hardly two inches across. (all this assumes 35 mm.)

Alex