Posts Made By: Weiman Kissinger

May 8, 2006 04:15 PM Forum: CCD Imaging and Processing/Solar System

Jupiter and Io this morning

Posted By Weiman Kissinger

Jim Phillips said:

Hello,
Swatting mosquitoes and imaging Jupiter, I knew this was my last night without mosquitoe repellent.
See attached.

Jim Phillips

Hi Jim,
Great shot! For mosquitos try tucking a "Bounce" fabric softener sheet under your belt. Supposedly these work well for keeping the biters away.

Weiman

March 9, 2007 09:48 PM Forum: CCD Imaging and Processing/Solar System

Need help with Registax

Posted By Weiman Kissinger

Guy,

There are two other utilities you may want to investigate to help with planetary imaging when the planet is moving from side to side in an AVI. The two utilities are AVI2BMP and PPMCENTRE.

AVI2BMP takes an AVI and extracts the frames into individually numbered BMP files. Once you've done that use PPMCENTRE.

PPMCENTRE reads a series of BMP files and rewrites each BMP whilst centering the planetary object in the middle of each new BMP. The result is a series of BMPS that have the planet essentially motionless in the middle of the each frame. You can align and stack the BMPS directly in Registax very easily since the planet won't drift at all.

Just google PPMCENTRE and AVI2BMP to find the downloads. Both are free.

Clear Skies...

Weiman


April 3, 2007 05:53 PM Forum: CCD Imaging and Processing/Solar System

My best Saturn to date

Posted By Weiman Kissinger

A fine image indeed, Ron. Hope you don't mind but I made some adjustments using Registax 4. Tweaked the wavelets and moved the blue channel down a bit, then a slight change in HSL so more of the banding is enhanced.

Clear skies...
Weiman

April 30, 2008 06:21 PM Forum: CCD Imaging and Processing/Solar System

one more Jupiter (and Io)

Posted By Weiman Kissinger

Two great shots Eric!

I have loads of AVIs from years past, some of which I'd like to try to enhance using the techniques you've described. Is this technique documented somewhere on a website or is it something you've developed yourself?

Also, it would be interesting if you could post images of your original processed AVIs just for comparison.

Clear and steady skies...

Weiman

June 24, 2008 07:43 PM Forum: CCD Imaging and Processing/Solar System

Jupiter in RGB and IrRGB May 31, 2008

Posted By Weiman Kissinger

Paul,
I think the IrRGB image is better than the RGB. I see more cloud detail in the Ir image.
Great shot.

Weiman

February 15, 2010 06:23 PM Forum: CCD Imaging and Processing/Solar System

Frame Rates

Posted By Weiman Kissinger

I saw in your recent Mars post that you're using a Toucam and although what James said is true, the Toucam is limited by the fact that it only transfers data at USB 1.0 speeds. Using higher frame rates with a Toucam means you introduce data loss because the firmware in the Toucam needs to reduce the amount of data contained in each frame in order to send it to the PC.

Generally with a Toucam the highest framerate I've used is 15FPS.

I also believe most webcam imagers on this forum recommend when the seeing is really good to lower the framerate to 10FPS on order to capture the most detail.

OTOH if you buy a Dragonfly or similar camera that can do up to 60FPS via USB 2.0 then the faster the better.

Here's hoping for clear and steady skies...

Weiman


October 14, 2010 04:05 PM Forum: CCD Imaging and Processing/Solar System

imaging Jupiter w/ CDK 20 and dsi III ?

Posted By Weiman Kissinger

Mark,
If you can afford a CDK 20 then you don't want to mess around with a $100 web camera for planetary imaging. The Toucam can only do 15fps without introducing noise into the image stream.
There are better cameras in the $600 and up range that can do 60fps without noise. Look at Dragonfly, DMK, etc to get better quality.
Of course seeing conditions and good transparency are also a must but I presume you're in a location that has those if you have a 20 inch scope.

Weiman

February 1, 2011 05:24 PM Forum: Politics

Finally...

Posted By Weiman Kissinger

Keep the pressure on for a Senate repeal by making some noise.

If you haven't yet signed the petition go to repealitnow.org

Weiman

October 5, 2011 03:45 PM Forum: CCD Imaging and Processing/Solar System

MOV files of Jupiter with Canon T1i

Posted By Weiman Kissinger

I have a T1i and haven't tried shooting video of Jupiter with it but I have a couple suggestions.

One thing to try is a variable polarizing filter. I use that on the moon to reduce brightness at the eyepiece.

The second suggestion is to mask the off the C11's objective in order to reduce the amount of light being delivered at the eyepiece.

I don't believe there is a way to disable the automatic exposure setting when taking HD video with the T1i since doing so implies you would set the exposure manually. This would not be a good thing to do in video as lighting conditions can (and do) change frequently over the course of any video recording.

Hope this helps.

Weiman

December 27, 2011 05:00 PM Forum: Digital SLR AstroPhotography

Problem with EOS Movie Record, from SourceForge

Posted By Weiman Kissinger

I have used it successfuly several times with a T1i. Have you checked the camera settings and made sure Live View mode is still enabled ? That was one problem I had initially since I don't use Live Mode for taking stills since it consumes battery.

Weiman.


robin woolsey said:

Hello,

I downloaded the EOS Movie Record from SourceForge and can't get it to work with my Canon T1i. It did not work initially, but worked for two test shots today. Now I can't get it to work again. It flashes cannot initialize the Live View mode or Camera not recognized or reconnect power cord across the bottom of the screen. I've changed power cords, disconnected and reconnected the power cord and even unloaded the program and reloaded it, still nothing.
Anyone have experience with this problem?
robin sad