Meade Mount on Celestron TripodPosted By James Moore |
Hi Dean.
I am new to Astromart and I just happen to know how to connect an LX200 10" Mount to a Nexstar 8 SE Tripod. The 10" Meade is held down by an M8-2 threaded rod, 16" long, (2MM pitch threads). If you have that rod all you have to do is drill the center hole in the 8 SE mount to M8 or 1/2" will work. Do the same to the eyepiece holder. you will need 3 knurled M8-2 clamp nuts. Two of them will be 'through hole' type. One for above the eyepiece holder and another one under it, and the third will be locked onto the end of the rod. then tighten the rod into the M8 -2 female in the bottom of your LX200 mount. Next, tighten the 1st clamp nut up tightly under the bottom of the tripod. That will hold the Mount in place. Then, push the eyepiece holder up where it belongs and tighten the other clamp nut under it just snuggly. That's it. You're done.
If you don't have the rod, you can find one on eBay. You might want to check to make sure the base of the mount is threaded M8-2. I'm pretty sure but that doesn't really cut it.
Hope that helps.
James Moore
I am new to Astromart and I just happen to know how to connect an LX200 10" Mount to a Nexstar 8 SE Tripod. The 10" Meade is held down by an M8-2 threaded rod, 16" long, (2MM pitch threads). If you have that rod all you have to do is drill the center hole in the 8 SE mount to M8 or 1/2" will work. Do the same to the eyepiece holder. you will need 3 knurled M8-2 clamp nuts. Two of them will be 'through hole' type. One for above the eyepiece holder and another one under it, and the third will be locked onto the end of the rod. then tighten the rod into the M8 -2 female in the bottom of your LX200 mount. Next, tighten the 1st clamp nut up tightly under the bottom of the tripod. That will hold the Mount in place. Then, push the eyepiece holder up where it belongs and tighten the other clamp nut under it just snuggly. That's it. You're done.
If you don't have the rod, you can find one on eBay. You might want to check to make sure the base of the mount is threaded M8-2. I'm pretty sure but that doesn't really cut it.
Hope that helps.
James Moore