Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

Wild slews and computer lock ups

Started by Joe Bruessow, 03/27/2006 05:12AM
Posted 03/27/2006 05:12AM Opening Post
sad I can't seem to get my system up an running.

Not sure where all of the problems are and hope you can help. I have an EM200 Temma Jr. controlled with The Sky V5 level 2, and the bisque temma driver.

1) I use CCD Soft V5 to aquire my images. The computer/ program keeps locking at random times... its driving me crazy. Am I doing something wrong here?

2) While trying to use the hand paddle to center/ frame an object the telescope starts slewing to some unknown destination.

Thanks for your help ahead of time...

Joe
Posted 03/27/2006 03:07PM #1
Hi Joe,

Are you using a separate filtered power supply for your CCD camera or do you have the camera, PC and mount running off the same 12V supply? The reason I ask is that I found it necessary to run my CCD off a separate supply from the PC due to noise created by tying everything together. Even in the field, I used a separate battery for the CCD than the laptop. I did find I could use an inverter and power the PC and laptop using their AC supplies with no problem, but that solution is so inefficient the battery charge would not last nearly as long.

Your problem may not be related to power, but IMO, this is a good place to start.


Randy Roy