Jean Texereau (1920-2014)
Just shy of his 95th birthday, Jean Texereau — France’s doyen of optical fabrication — passed away on February 6, 2014. In recent years he’d been living in the village of Seillans, in the department of Var.
For more than half a century Texereau made, refigured, or tested optics for large observatory telescopes. He also promoted amateur telescope making through the Société Astronomique de France. But his enduring gift to “glass pushers” around the world was his book La Construction du Télescope d’Amateur, which first appeared in 1951. An English edition, titled How To Make a Telescope, followed six years later.
In the book’s opening chapter, Texereau explained his concept of the “standard telescope” for beginners. This should be an 8-inch reflector, f/6 to f/8, on an altazimuth mount that could be built without a machine shop. He set these limitations because he didn’t want to overwhelm enthusiasts in their first attempt at a telescope. (However, as if to tantalize readers, he admitted that the book’s instructions would suffice for making mirrors up to at least 20 inches in diameter!)
The author's well-worn copy of the first English paperback edition from the 1960s. The book had appeared in hardcover from Interscience Publishers in 1957.
Roger Sinnott
Compared to the American mirror-making books of the 1950s, Texereau’s was more sure-footed in its discussion of the diffraction effects in telescopes. The technique he described for evaluating a mirror’s figure was a significant advance, mathematically, over those used elsewhere.
An expanded second edition of the book reached the French market in 1961. It contained new chapters on making a Cassegrain reflector, an equatorial mounting, and a large optical window to cut down air turbulence within a reflector’s tube. The new material made the book greatly sought after, and it soon went out of print. For a time in the 1980s, copies were selling for $1,000 on the second-hand book market.
Then in 1984, much to the excitement of a new generation of mirror makers, Willmann-Bell brought out the second English edition. It has remained in print ever since. Texereau’s writing has an authoritative ring, and he was never one to hide his opinions. He would go out of his way to answer letters from befuddled telescope makers, remembers Willmann-Bell’s Perry Remaklus. He may be the only professional optician ever to meld his experiences with large optics into a book of practical advice for the amateur.
Professional Career
In 1984 Willmann-Bell published this 2nd edition of Texereau, making the book once more available after a lapse of many years.
Roger Sinnott
Texereau’s first telescopes were homemade 10- and 20-inch reflectors. Then one day, in about 1946, the astronomer Gerard de Vaucouleurs introduced him to André Couder of Paris Observatory. Couder, who headed the optics laboratory there, promptly hired Texereau to be his right-hand man. As de Vaucouleurs later recalled it to me, “Couder told Texereau that to become a great optician he had first to sleep in Ritchey’s iron bed.” The bed was still being kept at the lab, even though George Ritchey had left two decades earlier. (Ritchey is best known today for having made the mirrors of the 60- and 100-inch Mount Wilson reflectors, and for inventing the Ritchey-Chrétien reflector design.)
At Paris Observatory, Texereau’s first project was to make the optics of a 24-inch Cassegrain reflector for Meudon Observatory. Many other duties followed in the years to come, including work on the primary mirrors of the 76-inch reflector at Haute-Provence Observatory and the 42-inch reflector at Pic du Midi.
In 1964 Texereau was invited to McDonald Observatory in Texas to see what could be done about the soft star images of the 82-inch reflector. That summer he performed 17 daily figuring steps on the 28-inch secondary mirror, and after each step he put the uncoated mirror back on the telescope for star tests at night. Before Texereau’s arrival, the telescope’s overall wavefront error had exceeded 1 wavelength of light. By the time he left, this error had been reduced to just 1/8 wave.
So did Jean Texereau ever take up André Couder’s suggestion and sleep in that old iron bed? Somehow, I suspect he did!
http://www.skyandtelescope.com/news/home/Jean-Texereau-Master-Optician-244865971.html
For more than half a century Texereau made, refigured, or tested optics for large observatory telescopes. He also promoted amateur telescope making through the Société Astronomique de France. But his enduring gift to “glass pushers” around the world was his book La Construction du Télescope d’Amateur, which first appeared in 1951. An English edition, titled How To Make a Telescope, followed six years later.
In the book’s opening chapter, Texereau explained his concept of the “standard telescope” for beginners. This should be an 8-inch reflector, f/6 to f/8, on an altazimuth mount that could be built without a machine shop. He set these limitations because he didn’t want to overwhelm enthusiasts in their first attempt at a telescope. (However, as if to tantalize readers, he admitted that the book’s instructions would suffice for making mirrors up to at least 20 inches in diameter!)
The author's well-worn copy of the first English paperback edition from the 1960s. The book had appeared in hardcover from Interscience Publishers in 1957.
Roger Sinnott
Compared to the American mirror-making books of the 1950s, Texereau’s was more sure-footed in its discussion of the diffraction effects in telescopes. The technique he described for evaluating a mirror’s figure was a significant advance, mathematically, over those used elsewhere.
An expanded second edition of the book reached the French market in 1961. It contained new chapters on making a Cassegrain reflector, an equatorial mounting, and a large optical window to cut down air turbulence within a reflector’s tube. The new material made the book greatly sought after, and it soon went out of print. For a time in the 1980s, copies were selling for $1,000 on the second-hand book market.
Then in 1984, much to the excitement of a new generation of mirror makers, Willmann-Bell brought out the second English edition. It has remained in print ever since. Texereau’s writing has an authoritative ring, and he was never one to hide his opinions. He would go out of his way to answer letters from befuddled telescope makers, remembers Willmann-Bell’s Perry Remaklus. He may be the only professional optician ever to meld his experiences with large optics into a book of practical advice for the amateur.
Professional Career
In 1984 Willmann-Bell published this 2nd edition of Texereau, making the book once more available after a lapse of many years.
Roger Sinnott
Texereau’s first telescopes were homemade 10- and 20-inch reflectors. Then one day, in about 1946, the astronomer Gerard de Vaucouleurs introduced him to André Couder of Paris Observatory. Couder, who headed the optics laboratory there, promptly hired Texereau to be his right-hand man. As de Vaucouleurs later recalled it to me, “Couder told Texereau that to become a great optician he had first to sleep in Ritchey’s iron bed.” The bed was still being kept at the lab, even though George Ritchey had left two decades earlier. (Ritchey is best known today for having made the mirrors of the 60- and 100-inch Mount Wilson reflectors, and for inventing the Ritchey-Chrétien reflector design.)
At Paris Observatory, Texereau’s first project was to make the optics of a 24-inch Cassegrain reflector for Meudon Observatory. Many other duties followed in the years to come, including work on the primary mirrors of the 76-inch reflector at Haute-Provence Observatory and the 42-inch reflector at Pic du Midi.
In 1964 Texereau was invited to McDonald Observatory in Texas to see what could be done about the soft star images of the 82-inch reflector. That summer he performed 17 daily figuring steps on the 28-inch secondary mirror, and after each step he put the uncoated mirror back on the telescope for star tests at night. Before Texereau’s arrival, the telescope’s overall wavefront error had exceeded 1 wavelength of light. By the time he left, this error had been reduced to just 1/8 wave.
So did Jean Texereau ever take up André Couder’s suggestion and sleep in that old iron bed? Somehow, I suspect he did!
http://www.skyandtelescope.com/news/home/Jean-Texereau-Master-Optician-244865971.html
Funding Member
