Several times, over the past few months, various folks have posted questions concerning the Tscopes manufactured by Ed Taychert of New York. Having recently received a 14" Tscope from Ed, I thought I would share some of my intial impressions here for the benefit of all.
PACKING...
Ed really does a fine job of packing his equipment! The telescope came in three boxes. Every individual component was well wrapped and securely resting in foam cut to shape for it. The inside of the boxes were lined with precisely cut one inch foam, and the largest boxes were also reinforced, top and bottom, with carefully cut plywood. Nice touch, that...Fed Ex had managed to gouge one of the corners of one box. I could see the slightly mangled plywood through the carton, and feared that the telescope itself had been damaged. Would have been, too, if it hadn't been for the plywood.
ASSEMBLY...
This telescope actually takes longer to uncrate than it does to assemble. The mirror carton has a warning "DO NOT OPEN", followed by instructions on how to access Ed's web-site for easy to follow instructions on how to install the mirror in it's tail-gate. All the instructions are accompanied by photos that make the whole job a real snap. Particularly nice are the attachments for the truss poles. Rather than hassling with eight seperate poles, Ed has joined them together at the top with a wooden cross piece. Now assembly is as easy as carrying four paired poles out, positioning the bottom ends in the cut outs provided for them in the mirror box, and dropping the upper cage onto the attachment rod on the cross piece. Four simple latches secure the whole thing together, and you're ready to collimate. Collimation is a breeze too, with big, easy to manipulate screws on the tailgate and on the secondary holders. The whole job is accomplished without any tools at all.
NOW THAT SHE'S UP...
Just a momnet to appreciate. Ed did a beautiful job on the woodworking, No, it's not Obssession or Starmaster quality, but then I didn't pay for that, did I? All the tongue and groove joints are carefully cut and fitted together, and the finsih is very attractive. All in all, a really nice looking little scope.
FIRST IMPRESSIONS USING HER...
This scope is nice to work with. The motions seem smooth enough, and did I mention that it's a little scope? At f/4.7, I can use this one without any ladders--what a relief! One of the reasons I asked Ed to build this for me was that my old 12.5" f/6 had some features that were turning out to be drawbacks with time. It took almost a half hour to set up (FIVE MINUTES with this one, NO KIDDING!)Also, my old scope was big and heavy. The 14" is actually five inches narrower, and four inches shorter. Not only that, but it's so much lighter (we're all getting older you know!) I can actually pick this scope up, FULLY ASSEMBLED, and walk it around if I don't like it's location.
ALL IN ALL...
Ed has done one fine job of putting together an easy to use, easy to assemble scope in a small, lightweight package. My scope was shipped minus a few of the items that I had ordered for it (light shroud, finder, and fan), but I have a message into Ed about that and hope to receive these items soon.
When I've had more time to play with--excuse me, RESEARCH this scope, I'll post some impressions on ease of use, and the optics.
Hope that helps to satisfy some of the curiosity about these Tscopes from Ed Taychert.
Best of skies to you all,
Larry Seguin
Taos, New Mexico
PACKING...
Ed really does a fine job of packing his equipment! The telescope came in three boxes. Every individual component was well wrapped and securely resting in foam cut to shape for it. The inside of the boxes were lined with precisely cut one inch foam, and the largest boxes were also reinforced, top and bottom, with carefully cut plywood. Nice touch, that...Fed Ex had managed to gouge one of the corners of one box. I could see the slightly mangled plywood through the carton, and feared that the telescope itself had been damaged. Would have been, too, if it hadn't been for the plywood.
ASSEMBLY...
This telescope actually takes longer to uncrate than it does to assemble. The mirror carton has a warning "DO NOT OPEN", followed by instructions on how to access Ed's web-site for easy to follow instructions on how to install the mirror in it's tail-gate. All the instructions are accompanied by photos that make the whole job a real snap. Particularly nice are the attachments for the truss poles. Rather than hassling with eight seperate poles, Ed has joined them together at the top with a wooden cross piece. Now assembly is as easy as carrying four paired poles out, positioning the bottom ends in the cut outs provided for them in the mirror box, and dropping the upper cage onto the attachment rod on the cross piece. Four simple latches secure the whole thing together, and you're ready to collimate. Collimation is a breeze too, with big, easy to manipulate screws on the tailgate and on the secondary holders. The whole job is accomplished without any tools at all.
NOW THAT SHE'S UP...
Just a momnet to appreciate. Ed did a beautiful job on the woodworking, No, it's not Obssession or Starmaster quality, but then I didn't pay for that, did I? All the tongue and groove joints are carefully cut and fitted together, and the finsih is very attractive. All in all, a really nice looking little scope.
FIRST IMPRESSIONS USING HER...
This scope is nice to work with. The motions seem smooth enough, and did I mention that it's a little scope? At f/4.7, I can use this one without any ladders--what a relief! One of the reasons I asked Ed to build this for me was that my old 12.5" f/6 had some features that were turning out to be drawbacks with time. It took almost a half hour to set up (FIVE MINUTES with this one, NO KIDDING!)Also, my old scope was big and heavy. The 14" is actually five inches narrower, and four inches shorter. Not only that, but it's so much lighter (we're all getting older you know!) I can actually pick this scope up, FULLY ASSEMBLED, and walk it around if I don't like it's location.
ALL IN ALL...
Ed has done one fine job of putting together an easy to use, easy to assemble scope in a small, lightweight package. My scope was shipped minus a few of the items that I had ordered for it (light shroud, finder, and fan), but I have a message into Ed about that and hope to receive these items soon.
When I've had more time to play with--excuse me, RESEARCH this scope, I'll post some impressions on ease of use, and the optics.
Hope that helps to satisfy some of the curiosity about these Tscopes from Ed Taychert.
Best of skies to you all,
Larry Seguin
Taos, New Mexico