Image of the day

Captured by
Bruce Karbal

VDB 142 Elephant Trunk HOO

My Account

New to Astromart?

Register an account...

Need Help?

2 weeks evaluation on side fans

Started by Ron777, 05/10/2004 09:53PM
Posted 05/10/2004 09:53PM Opening Post
For those who are interested, I have been testing the newt side fans over the last 2 weeks and have some definate conclusions on them.

1) Both 3 inch fans, running at full power NEVER cools the mirror fast enough to catch up. That's why I kept thinking the fans were not doing anything.

2) They do remove the boundary layer as evidenced from out of focus star images. BUT, the mirror must still be changing shape from cooling. Pyrex mirrors might not have this problem.

3) If I pre-cool the mirror for 15 minutes with a big house fan, the images will be perfect for a while, but if the temp is still dropping quickly, after 5-10 they start to warble and get fuzzy again. Running the fans at this point delays and slows the degradation but doesn't stop it.

4) Running the big house fan for an hour though makes the images stable enough I don't even need the side fans.

Conclusion- I chopped holes in the tube for noth'en! :-(

anyone else who's recently done this have any input?

Take care!
Ron
Posted 05/10/2004 11:30PM #1
Ron:
Are you using just 2 fans blowing across the front with no fan on the rear of the mirror?
Bill in SA
Posted 05/10/2004 11:50PM #2
Ron,
I suspect that you have a real heat sink for a mirror and cell. If the fans you are using are typical in flow rate, they whould be changing out the air in the tube every minute. If they are not doing enough to cool the mirror down, then the flow must not be working or not enough. I suspect that the air needs to be blowing on the bottom as well as over the top of the mirror to actually cool it down.
Floyd

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 05/11/2004 01:00PM #3
Ron, I don't remember - what is your fan configuration? Do you have vent holes opposite the fans? If not, then there's no place for the warm air to go.

Doug