Image of the day

Captured by
james carter

North American Nebula NGC7000

My Account

New to Astromart?

Register an account...

Need Help?

Advice: Before I take the pluck

Started by HowardP, 12/04/2004 11:01PM
Posted 12/04/2004 11:01PM Opening Post

I have a Pelican 1600 case and want to pick-n-pluck as shown. I'd like any advice or suggestions with:

layout
eye pieces verticle or horizontal
how to get good results - clean edges
technique
etc.

any comments appreciated

howard

Attached Image:

HowardP's attachment for post 20591
Posted 12/04/2004 11:24PM #1
I prefer my eyepieces laying down in the case. Unless you label the caps, it is very hard to tell what is what when they are vertical.

It takes more room to do it that way. But think of it as a way to keep you from buying more eyepieces. ;-)

Posted 12/04/2004 11:52PM #2
You can put paper label on each cap or put them in sequence by size so they are simple to locate. Then you can mount them verticle and have more space. The case is quite deep and horizontal would seem wasteful of space.
That being said, I put most of my EPs in my cases laying on their sides, but my cases are not deep enough to go verticel with many of my EPs.

Attached Image:

fblue's attachment for post 85579

[SIZE="Large"][/SIZE][COLOR="Blue"][/COLOR] Floyd Blue grin
Amateur Imager
Posted 12/05/2004 01:25AM #3

With the pick-n-pluck do you use scissors to assist or just sort of tear it along the edge?

thanks for the advice

howard
Posted 12/05/2004 01:47AM #4
Plan your layout first by sticking toothpicks in. If you put the eyepieces in vertically, you can fit more in the case (see pic of 1550's). If you place them in order of focal length, you'll always know where each one is without needing labels or a light. Leave two foam squares between adjacent eyepieces, one isn't enough and will eventually tear.

Paul

Attached Image:

laservet's attachment for post 85585
Posted 12/05/2004 01:53AM #5
i prefer not to pluck. i push the foam down in the outline of the eyepiece. everything stays in place and is easy to rearrange if necessary.
Posted 12/06/2004 12:18AM #6
I'd just Pluck Off.... grin

Scott

URL http://www.SPACEAHOLIC.com/

Preserving Space History for the Future
Posted 12/08/2004 07:02PM #7
As a relatively inexpensive alternative to the pluckfoam approach, I unholstered my hand drill and hole-saw bits and came up with a solution I like a lot.

I started with a $30 Harbor Freight upright aluminum case ( http://tinyurl.com/6v86r ) and then I hit the local Home Depot for some planking and dowling.

see accompanying pic.

The real beauty of this rig for me is that when sitting on the ground next to me, the eyepieces are all at a very comfortable grabbing height and the half-lid opens and closes with just a single unoccupied finger. Also, when I bring it in, I just leave the lid loosely overlapped on teh latches for an hour for a complete "dry-out".


-Paul S. Walsh


Attached Image:

filmdos's attachment for post 85727