Image of the day

Captured by
Lawrence Parchman

Eastern Veil Nebula (NGC 6992) - Wide View

My Account

New to Astromart?

Register an account...

Need Help?

EZ Focus Kit

Started by davidcolton, 11/12/2003 08:12PM
Posted 11/12/2003 08:12PM Opening Post
I've been thinking about buying a Crayford focuser for my LX90. However, in looking through this forum's archives, I've also read some positive feedback about the EZ Focus Kit and the fact that it can produce the same results for much less cost.

At the same time, I don't consider myself much of a tinkerer and the idea of opening the scope up and "jiggling" things around has me worried. Some words of encouragement and perhaps clarification about the installation process would be appreciated.
Posted 11/12/2003 08:32PM #1
With a crayford, you have to watch the fork clearance at zenith. I have a JMI purchased because it was the shortest. Still will not come to zenith. With a JMI and a 2" Diagonal you'll need about 6" of clearance from the back of the SCT OTA not not have to worry about it and 5.25" if the JMI is fully racked in (kinda defeats the point).

A LX90 has 5", N8GPS 5.5", 8"LX200 don't know.
Posted 11/12/2003 09:04PM #2
Hello David!

I personally installed the EZ-Focus kit on my scope (10" LX-200GPS) and it works like a charm! Probably one of the BEST add-ons to my scope. The focuser is as smooth as it gets!

As far as the procedure goes, well, it is not bad at all. If you have a mechanic inclination then it will be a piece of cake. If not, no biggie, it might take you a little longer, but I do not forsee anybody having real problems with it, as the procedure is pretty straightforward and simple, if you follow the instructions...

I'll definitely say "Go for it"!



Ivan
smile

One happy EZ-Focus kit owner/user!

Ivan Gastaldo 8)
Coconut Creek, FL

Ivan's Observatory
Lat 26N 16' 48" Long 80W 10' 48"
[COLOR="Red"]Personal Website:[/COLOR] http://www.ivangastaldo.com

CCD Imaging and Processing/Deep Sky - Moderator
I like to complain about everything - Moderator
Posted 11/13/2003 02:18AM #3
Hi David,

I've installed the EZ Focus Kit on my 12" LX200 with no problems. It's fast and easy, but as the instructions tell you. It's designed to remove back lash from the focuser NOT IMAGE SHIFT. If you're having trouble with image shift then go with the Crayford focuser which is the only easy cure for this problem on a SCT.

Clear Skies,
David Pope